Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 41

Defaults None. Command Mode EXEC Privilege Command History Version 7.7.1.0 Version 7.5.1.0 Renamed keyword primary-fpga-flash to fpga-image. Introduced on C-Series Example Command example: restore fpga-image Force10#restore fpga-image linecard 4 Current FPGA information in the system Card FPGA Name Current Version New Version LC4 48 Port 1G LCM FPGA A: 3.6 restore * Warning - Upgrading FPGA is inherently risky and should * * only be attempted when necessary. A failure at this upgrade may * * cause a board RMA. Proceed with caution ! * Restore fpga image for linecard 4 [yes/no]: yes FPGA restore in progress. Please do NOT power off the card Upgrade result Linecard 4 FPGA restore successful. Usage Information Related Commands Reset the card using the power-cycle option after restoring the FPGA command. reset Reset a card. show boot system c e Displays information about boot images currently configured on the system. Syntax Parameters show boot system {all | linecard [slot | all] | rpm | stack-unit [0-11 | all]} all linecard rpm stack-unit Enter this keyword to display boot image information for all linecards and rpms. Enter this keyword to display boot image information for the specified linecard(s) on the system. Enter this keyword to display boot image information for all rpms on the system. Enter this keyword to display boot image information for one or all the S55 units. Defaults No default values or behavior File Management | 41