Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 341

Table 8-16. Command Example fields: show ip bgp summary Field Up/Down State/Pfxrcd Description Displays the amount of time that the neighbor is in the Established stage. If the neighbor has never moved into the Established stage, the word never is displayed. The output format is: Time Established----------Display Example < 1 day 00:12:23 (hours:minutes:seconds) < 1 week 1d21h (DaysHours) > 1 week 11w2d (WeeksDays) If the neighbor is in Established stage, the number of network prefixes received. If a maximum limit was configured with the neighbor maximum-prefix command, (prfxd) appears in this column. If the neighbor is not in Established stage, the current stage is displayed (Idle, Connect, Active, OpenSent, OpenConfirm) When the peer is transitioning between states and clearing the routes received, the phrase (Purging) may appear in this column. If the neighbor is disabled, the phrase (Admin shut) appears in this column. Command History Version 8.3.5.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S55. Introduced support on S-Series Introduced support on C-Series show running-config bgp c e s Use this feature to display the current BGP configuration. Syntax show running-config bgp Defaults No default values or behavior Command Modes EXEC Privilege Command History Version 8.3.5.0 Version 7.8.1.0 Version 7.7.1.0 Version 7.6.1.0 Introduced on the S55. Introduced on S-Series Introduced on C-Series Introduced on E-Series timers bgp c e s Adjust BGP Keep Alive and Hold Time timers. Syntax timers bgp keepalive holdtime To return to the default, enter no timers bgp. Border Gateway Protocol IPv4(BGPv4) | 341