Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 55
upgrade C-Series version
View all Dell Force10 S55T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
system-image all linecard linecard-slot rpm booted file-url Enter the keyword system-image to upgrade the cache boot image. Enter the keyword all to upgrade the bootflash/boot selector image on all processors in the E-Series. This keyword does not upgrade the bootflash on the standby RPM. Enter the keyword linecard followed by the slot number to change the bootflash image on a specific line card. E-Series Range: 0 to 13 on the E1200; 0 to 6 for the E600; 0 to 5 on the E300 Enter the keyword rpm to upgrade the bootflash/boot selector image on all processors on the RPM. Enter this keyword to upgrade using the image packed with the currently running FTOS image. Enter the following location keywords and information to upgrade using an FTOS image other than the one currently running: Enter the transfer method and file location: flash://filename ftp://userid:password@hostip/filepath slot0://filename tftp://hostip/filepath Defaults No configuration or default values Command Modes EXEC Privilege Command History Version 7.7.1.0 Removed alt-bootflash-image, alt-bootselector-image, alt-system-image options, rp1, rp2, and cp options. E-Series original Command Usage Information A system message appears stating the Bootflash upgrade status. Reload the system to boot from the upgraded boot images. Once the URL is specified, the same downloaded image can be used for upgrading an individual RPM, line cards, SFM FPGA, and system-image for cache-boot without specifying the file-url again using the command upgrade {bootflash-image | bootselector-image | system-image} {all | linecard linecard-slot | rpm}. After 20 minutes, the cached memory is released and returned for general use, but the URL is maintained and you do not have to specify it for subsequent upgrades. Related Commands upgrade fpga-image (E-Series) boot system (S55) Upgrade the FPGA version in the specified E-Series SFM. Display configured boot image information upgrade (C-Series version) c Upgrade the bootflash or boot selector image on a processor. Syntax upgrade {bootflash-image | bootselector-image | system-image} {all | linecard {number | all} | rpm} [booted | file-url | repair] File Management | 55