Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 849

Table 32-7. test cam-usage Command Example Fields Field Estimated CAM per Port Status (Allowed ports) Description Indicates the number of free CAM entries required (for the classification rules) to apply the input policy map on a single interface. Note: The CAM entries for the default rule are not included in this column; a CAM entry for the default rule is always dedicated to a port and is always available for that interface. Indicates if the input policy map configuration on an interface belonging to a linecard/port-pipe is successful-Allowed (n)-or not successful- Exception. The allowed number (n) indicates the number of ports in that port-pipe on which the Policy Map can be applied successfully. Usage This features allows you to determine if the CAM has enough space available before applying the Information configuration on an interface. An input policy map with both Trust and Class-map configuration, the Class-map rules are ignored and only the Trust rule is programmed in the CAM. In such an instance, the Estimated CAM output column will contain the size of the CAM space required for the Trust rule and not the Class-map rule. threshold e Specify the minimum and maximum threshold values for the configured WRED profiles. Syntax threshold min number max number To remove the threshold values, use the no threshold min number max number command. Parameters min number max number Enter the keyword min followed by the minimum threshold number for the WRED profile. Range: 1024 to 77824 KB Enter the keyword max followed by the maximum threshold number for the WRED profile. Range: 1024 to 77824 KB Defaults No default behavior or values Command Modes CONFIGURATION (config-wred) Command History pre-Version 6.1.1.1 Introduced on E-Series Usage Information Use this command to configure minimum and maximum threshold values for user defined profiles. Additionally, use this command to modify the minimum and maximum threshold values for the pre-defined WRED profiles. If you delete threshold values of the pre-defined WRED profiles, the profiles will revert to their original default values. Quality of Service (QoS) | 849