Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 348

www.dell.com | support.dell.com To disable debugging, enter no debug ip bgp updates [in | out] command. Parameters updates in out Enter the keyword updates to view BGP update information. (OPTIONAL) Enter the keyword in to view only BGP updates received from neighbors. (OPTIONAL) Enter the keyword out to view only BGP updates sent to neighbors. Command Modes EXEC Privilege Defaults Disabled. Command History Version 7.8.1.0 Version 7.7.1.0 Version 7.6.1.0 Introduced support on S-Series Introduced support on C-Series Introduced IPv6 MGBP support for E-Series distance bgp c et s Define an administrative distance for routes. Syntax distance bgp external-distance internal-distance local-distance To return to default values, enter no distance bgp. Parameters external-distance internal-distance local-distance Enter a number to assign to routes learned from a neighbor external to the AS. Range: 1 to 255. Default: 20 Enter a number to assign to routes learned from a router within the AS. Range: 1 to 255. Default: 200 Enter a number to assign to routes learned from networks listed in the network command. Range: 1 to 255. Default: 200 Defaults external-distance = 20; internal-distance = 200; local-distance = 200. Command Modes ROUTER BGP (conf-router_bgp_af) Caution: Force10 Networks recommends that you do not change the administrative distance of internal routes. Changing the administrative distances may cause routing table inconsistencies. Usage Information The higher the administrative distance assigned to a route means that your confidence in that route is low. Routes assigned an administrative distance of 255 are not installed in the routing table. Routes from confederations are treated as internal BGP routes. 348 | Border Gateway Protocol IPv4(BGPv4)