Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 868

www.dell.com | support.dell.com metric metric-value route-map map-name (OPTIONAL) Enter the keyword metric followed by a number as the metric value. Range: 1 to 16 Default: 1 (OPTIONAL) Enter the keyword route-map followed by the name of a configured route-map. Defaults Disabled. metric: 1 Command Modes ROUTER RIP Command History Version 8.3.5.0 Version 7.8.1.0 Version 7.6.1.0 pre-Version 6.2.1.1 Introduced on S55 Introduced on S-Series Introduced on C-Series Introduced on E-Series Usage The default route must be present in the switch routing table for the default-information originate Information command to take effect. default-metric c e s Change the default metric for routes. Use this command with the redistribute command to ensure that all redistributed routes use the same metric value. Syntax default-metric number To return the default metric to the original values, enter no default-metric. Parameters number Specify a number. Range: 1 to 16. The default is 1. Default 1 Command Modes ROUTER RIP Command History Version 8.3.5.0 Version 7.8.1.0 Version 7.6.1.0 pre-Version 6.2.1.1 Introduced on S55 Introduced on S-Series Introduced on C-Series Introduced on E-Series Usage This command ensures that route information being redistributed is converted to the same metric value. Information Related Commands redistribute Allows you to redistribute routes learned by other methods. 868 | Router Information Protocol (RIP)