Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 628
show cam maccheck linecard, 0xfff, STATIC_BIT=0, HIT_SA
View all Dell Force10 S55T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 628 highlights
www.dell.com | support.dell.com Command History pre-Version 6.2.1.1 Introduced on E-Series show cam maccheck linecard c Display the results of the BCMI2 check command. Syntax show cam maccheck linecard slot port-set port-pipe Parameters linecard slot port-set port-pipe (REQUIRED) Enter the keyword linecard followed by a slot number to select the linecard for which to gather information. C300 range: 0 to 7; C150 range: 0 to 4 (REQUIRED) Enter the keyword port-set followed by a Port-Pipe number to select the Port-Pipe for which to gather information. Range: 0 or 1 Command Modes EXEC EXEC Privilege Command History Example Version 7.6.1.0 Introduced on C-Series Figure 21-1. show cam maccheck linecard Command Output Example Force10#show cam maccheck linecard 2 port-set 0 Dumping entries. From 0 to 16383. Progress . marks 100 memory table entries Index 5576 (0x15c8) has valid entries (H: 2b9, E: 0) ..........Index 6592 (0x19c0) has valid entries (H: 338, E: 0) output truncated Usage Information Use this command to check various flags associated with each MAC address in the CAM. Figure 21-1 shows information for two MAC addresses. The second entry is for MAC address 00:00:a0:00:00:00 (leading 0s are not shown), which is shown as learned on VLAN ID 4094 (0xfff), as shown below in Figure 21-2 and Figure 21-3. Above, "STATIC_BIT=0" means that the address is dynamically learned. When an entry is listed as STATIC_BIT=1, its HIT_SA is 0, which signifies that this address is not getting continuously learned trough traffic. The HIT_DA is set when a new learn happens, and after the first age sweep, it gets reset. 628 | Layer 2