Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 425

Command History Version 8.3.5.0 Version 7.6.1.0 Introduced on the S55. Introduced on C, E, and S-Series Example Figure 13-3. show gvrp statistics Command Example Force10#show gvrp statistics int gi 1/0 Join Empty Received: 0 Join In Received: 0 Empty Received: 0 LeaveIn Received: 0 Leave Empty Received: 0 Leave All Received: 40 Join Empty Transmitted: 156 Join In Transmitted: 0 Empty Transmitted: 0 Leave In Transmitted: 0 Leave Empty Transmitted: 0 Leave All Transmitted: 41 Invalid Messages/Attributes skipped: 0 Failed Registrations: 0 Force10# Usage Information Related Commands Invalid messages/attributes skipped can occur in the following cases: • The incoming GVRP PDU has an incorrect length. • "End of PDU" was reached before the complete attribute could be parsed. • The Attribute Type of the attribute that was being parsed was not the GVRP VID Attribute Type (0x01). • The attribute that was being parsed had an invalid attribute length. • The attribute that was being parsed had an invalid GARP event. • The attribute that was being parsed had an invalid VLAN ID. The valid range is 1 - 4095. A failed registration can occur for the following reasons: • Join requests were received on a port that was blocked from learning dynamic VLANs (GVRP Blocking state). • An entry for a new GVRP VLAN could not be created in the GVRP database. show gvrp Display the GVRP configuration GARP VLAN Registration (GVRP) | 425