Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 928

www.dell.com | support.dell.com radius-server host c e s Configure a RADIUS server host. Syntax radius-server host {hostname | ip-address} [auth-port port-number] [retransmit retries] [timeout seconds] [key [encryption-type] key] To delete a RADIUS server host or return to the default values, use the no radius-server host {hostname | ip-address} [auth-port] [retransmit] [timeout] command. Parameters hostname ip-address auth-port port-number retransmit retries timeout seconds key [encryption-type] key Enter the name of the RADIUS server host. Enter the IP address, in dotted decimal format, of the RADIUS server host. (OPTIONAL) Enter the keyword auth-port followed by a number as the port number. Range: zero (0) to 65535 The default port-number is 1812. (OPTIONAL) Enter the keyword retransmit followed by a number as the number of attempts. This parameter overwrites the radius-server retransmit command. Range: zero (0) to 100 Default: 3 attempts (OPTIONAL) Enter the keyword timeout followed by the seconds the time interval the switch waits for a reply from the RADIUS server. This parameter overwrites the radius-server timeout command. Range: 0 to 1000 Default: 5 seconds (OPTIONAL) Enter the keyword key followed by an optional encryption-type and a string up to 42 characters long as the authentication key. This authentication key is used by the RADIUS host server and the RADIUS daemon operating on this switch. For the encryption-type, enter either zero (0) or 7 as the encryption type for the key entered. The options are: • 0 is the default and means the password is not encrypted and stored as clear text. • 7 means that the password is encrypted and hidden. Configure this parameter last because leading spaces are ignored. Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.5.0 Version 7.7.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.2.1.1 Introduced on S55 Authentication key length increased to 42 characters Support added for S-Series Support added for C-Series Introduced on E-Series Usage Configure up to six RADIUS server hosts by using this command for each server host configured. Information FTOS searches for the RADIUS hosts in the order they are configured in the software. 928 | Security