Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 83
linecard
View all Dell Force10 S55T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Command History Version 8.3.5.0 Introduced on the S55. Version 8.1.1.0 Introduced on E-Series ExaScale Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series original Command Usage You cannot delete a terminal connection. Information Related Commands access-class password show linecard Restrict incoming connections to a particular IP address in an IP access control list (ACL). Specify a password for users on terminal lines. Display the line card(s) status. linecard c e Pre-configure a line card in a currently empty slot of the system or a different line card type for the slot. Syntax linecard number card-type To delete a card setting, use the no linecard number command. Parameters number card-type Enter the number of the slot. C-Series Range: 0-7 E-Series Range: 0 to 13 on a E1200/E1200i, 0 to 6 on a E600/E6001, and 0 to 5 on a E300. Enter the line card ID (see the Supported Hardware section in the Release Notes). Defaults Not configured Command Modes CONFIGURATION Command History Version 8.1.1.2 Introduced on E-Series ExaScale E600i Version 8.1.1.0 Introduced on E-Series ExaScale E1200i Version 7.5.1.0 Introduced on C-Series E-Series original Command Usage Information Use this command only for empty slots or a slot where you have hot-swapped a different line card type. Before inserting a card of a different type into the pre-configured slot, execute the no linecard number command. The following screenshot shows the current supported C-Series line cards, along with their "card types" (card-type IDs). Control and Monitoring | 83