HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 115

Configuring TCP tests

Get HP 6125G PDF manuals and user guides View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 115 highlights

Step 6. Configure the source IP address of SNMP packets. 7. Configure optional parameters. Command source ip ip-address See "Configuring optional parameters for an NQA test group" Remarks Optional. By default, no source IP address is specified. The source IP address must be the IP address of a local interface. The local interface must be up. Otherwise, no probe packets can be sent out. Optional. Configuring TCP tests TCP tests of an NQA test group are used to test the TCP connection between the NQA client and a port on the NQA server and the time for setting up a connection. The test result helps you evaluate the availability and performance of the services provided by the port on the server. TCP tests require cooperation between the NQA server and the NQA client. Before you start TCP tests, configure a TCP listening service on the NQA server. For more information about the TCP listening service configuration, see "Configuring the NQA server." To configure TCP tests: Step 1. Enter system view. 2. Enter NQA test group view. 3. Configure the test type as TCP, and enter test type view. 4. Configure the destination address of TCP probe packets. Command system-view nqa entry admin-name operation-tag type tcp destination ip ip-address 5. Configure the destination port of TCP probe packets. destination port port-number 6. Configure the source IP address of TCP source ip ip-address probe packets. 7. Configure optional parameters. See "Configuring optional parameters for an NQA test group" Remarks N/A N/A N/A By default, no destination IP address is configured. The destination address must be the same as the IP address of the listening service configured on the NQA server. By default, no destination port number is configured. The destination port number must be the same as that of the listening service on the NQA server. Optional. By default, no source IP address is specified. The source IP address must be the IP address of a local interface. The local interface must be up. Otherwise, no probe packets can be sent out. Optional. 108

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
108
Step
Command
Remarks
6.
Configure the source IP
address of SNMP
packets.
source ip
ip-address
Optional.
By default, no source IP address is specified.
The source IP address must be the IP address of
a local interface. The local interface must be up.
Otherwise, no probe packets can be sent out.
7.
Configure optional
parameters.
See "
Configuring optional
parameters for an NQA
test group
"
Optional.
Configuring TCP tests
TCP tests of an NQA test group are used to test the TCP connection between the NQA client and a port
on the NQA server and the time for setting up a connection. The test result helps you evaluate the
availability and performance of the services provided by the port on the server.
TCP tests require cooperation between the NQA server and the NQA client. Before you start TCP tests,
configure a TCP listening service on the NQA server. For more information about the TCP listening
service configuration, see "
Configuring the NQA server
."
To configure TCP tests:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter NQA test
group view.
nqa
entry
admin-name
operation-tag
N/A
3.
Configure the test
type as TCP, and
enter test type view.
type
tcp
N/A
4.
Configure the
destination address
of TCP probe
packets.
destination ip
ip-address
By default, no destination IP address is configured.
The destination address must be the same as the IP
address of the listening service configured on the
NQA server.
5.
Configure the
destination port of
TCP probe packets.
destination port
port-number
By default, no destination port number is
configured.
The destination port number must be the same as
that of the listening service on the NQA server.
6.
Configure the source
IP address of TCP
probe packets.
source ip
ip-address
Optional.
By default, no source IP address is specified.
The source IP address must be the IP address of a
local interface. The local interface must be up.
Otherwise, no probe packets can be sent out.
7.
Configure optional
parameters.
See "
Configuring optional
parameters for an NQA
test group
"
Optional.