HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 48
Enabling system information output to the console
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Step 6. Configure the timestamp format. Command info-center timestamp { debugging | log | trap } { boot | date | none } Remarks Optional. By default, the timestamp format for log, trap and debugging information is date. Enabling system information output to the console To enable the display of system information on the console in user view: Step 1. Enable system information output to the console. 2. Enable the display of system information on the console. Command terminal monitor • Enable the display of debugging information on the console: terminal debugging • Enable the display of log information on the console: terminal logging • Enable the display of trap information on the console: terminal trapping Remarks Optional. The default setting is enabled. Optional. By default, the console only displays log and trap information, and discards debug information. Outputting system information to the monitor terminal Monitor terminals refer to terminals that log in to the switch through the VTY user interface. Configuring a system information output rule for the monitor terminal Step Command Remarks 1. Enter system view. system-view N/A 2. Enable the information center. info-center enable Optional. Enabled by default. 3. Name the channel with a specified channel number. info-center channel channel-number Optional. name channel-name See Table 2 for default channel names. 4. Configure the channel Optional. through which system information can be info-center monitor channel By default, system information is output to output to a monitor { channel-number | channel-name } the monitor terminal through channel 1 terminal. (known as monitor). 41