HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 31
Device C is 16 while that of Device B is 3, Device B synchronizes to Device C.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
system-view [DeviceB] ntp-service unicast-server 3.0.1.31 3. Display the NTP status of Device B after clock synchronization. [DeviceB] display ntp-service status Clock status: synchronized Clock stratum: 3 Reference clock ID: 3.0.1.31 Nominal frequency: 100.0000 Hz Actual frequency: 100.0000 Hz Clock precision: 2^18 Clock offset: -21.1982 ms Root delay: 15.00 ms Root dispersion: 775.15 ms Peer dispersion: 34.29 ms Reference time: 15:22:47.083 UTC Sep 19 2005 (C6D95647.153F7CED) The output shows that Device B has synchronized to Device A because it has a higher stratum than Device A. 4. Configure Device C (after Device B is synchronized to Device A): # Configure Device C as a symmetric peer after local synchronization. [DeviceC] ntp-service unicast-peer 3.0.1.32 The output shows that Device B and Device C are configured as symmetric peers, with Device C in symmetric-active mode and Device B in symmetric-passive mode. Because the stratus level of Device C is 16 while that of Device B is 3, Device B synchronizes to Device C. # Display the NTP status of Device C after clock synchronization. [DeviceC] display ntp-service status Clock status: synchronized Clock stratum: 4 Reference clock ID: 3.0.1.32 Nominal frequency: 100.0000 Hz Actual frequency: 100.0000 Hz Clock precision: 2^18 Clock offset: -21.1982 ms Root delay: 15.00 ms Root dispersion: 775.15 ms Peer dispersion: 34.29 ms Reference time: 15:22:47.083 UTC Sep 19 2005 (C6D95647.153F7CED) The output shows that Device C has synchronized to Device B because it has a higher stratum than Device B. # Display NTP session information for Device C. [DeviceC] display ntp-service sessions source reference stra reach poll now offset delay disper [12345] 3.0.1.32 3.0.1.31 3 3 64 16 -6.4 4.8 1.0 note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured Total associations : 1 The output shows that an association has been set up between Device B and Device C. 24