HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 144
Remove the IP address of VLAN-interface 3 on Device B., On Device
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Reaction: 1 # Display brief information about active routes in the routing table on Device A. [DeviceA] display ip routing-table Routing Tables: Public Destinations : 5 Routes : 5 Destination/Mask Proto Pre Cost NextHop Interface 10.1.1.0/24 10.2.1.0/24 10.2.1.2/32 127.0.0.0/8 127.0.0.1/32 Static 60 0 Direct 0 0 Direct 0 0 Direct 0 0 Direct 0 0 10.2.1.1 10.2.1.2 127.0.0.1 127.0.0.1 127.0.0.1 Vlan3 Vlan3 InLoop0 InLoop0 InLoop0 The output shows that the static route with the next hop 10.2.1.1 is active, and the status of the track entry is positive. The static route configuration works. # Remove the IP address of VLAN-interface 3 on Device B. system-view [DeviceB] interface vlan-interface 3 [DeviceB-Vlan-interface3] undo ip address # On Device A, display information about all the track entries. [DeviceA] display track all Track ID: 1 Status: Negative Notification delay: Positive 0, Negative 0 (in seconds) Reference object: NQA entry: admin test Reaction: 1 # Display brief information about active routes in the routing table on Device A. [DeviceA] display ip routing-table Routing Tables: Public Destinations : 4 Routes : 4 Destination/Mask Proto Pre Cost NextHop Interface 10.2.1.0/24 10.2.1.2/32 127.0.0.0/8 127.0.0.1/32 Direct 0 0 Direct 0 0 Direct 0 0 Direct 0 0 10.2.1.2 127.0.0.1 127.0.0.1 127.0.0.1 Vlan3 InLoop0 InLoop0 InLoop0 The output shows that the next hop 10.2.1.1 of the static route is not reachable, and the status of the track entry is negative. The static route does not work. 137