HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 132
UDP jitter test configuration example, Network requirements
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
[DeviceA-nqa-admin-test-http] url /index.htm # Configure the HTTP version 1.0 to be used in HTTP tests. (Version 1.0 is the default version, and this step is optional.) [DeviceA-nqa-admin-test-http] http-version v1.0 # Enable the saving of history records. [DeviceA-nqa-admin-test-http] history-record enable [DeviceA-nqa-admin-test-http] quit # Start HTTP tests. [DeviceA] nqa schedule admin test start-time now lifetime forever # Stop HTTP tests after a period of time. [DeviceA] undo nqa schedule admin test # Display results of the last HTTP test. [DeviceA] display nqa result admin test NQA entry (admin admin, tag test) test results: Destination IP address: 10.2.2.2 Send operation times: 1 Receive response times: 1 Min/Max/Average round trip time: 64/64/64 Square-Sum of round trip time: 4096 Last succeeded probe time: 2011-01-22 10:12:47.9 Extended results: Packet loss in test: 0% Failures due to timeout: 0 Failures due to disconnect: 0 Failures due to no connection: 0 Failures due to sequence error: 0 Failures due to internal error: 0 Failures due to other errors: Packet(s) arrived late: 0 # Display the history of HTTP tests. [DeviceA] display nqa history admin test NQA entry (admin admin, tag test) history record(s): Index Response Status Time 1 64 Succeeded 2011-01-22 10:12:47.9 UDP jitter test configuration example Network requirements As shown in Figure 43, configure NQA UDP jitter tests to test the delay jitter of packet transmission between Device A and Device B. Figure 43 Network diagram 125