HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 120
Configuring threshold monitoring, Configuration prerequisites, Configuration guidelines
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Configuring threshold monitoring Configuration prerequisites Before you configure threshold monitoring, complete the following tasks: • Configure the destination address of the trap message by using the snmp-agent target-host command. For more information about the snmp-agent target-host command, see Network Management and Monitoring Command Reference. • Create an NQA test group and configure the related parameters. Configuration guidelines Follow these guidelines when you configure threshold monitoring: • NQA DNS tests do not support the action of sending trap messages. The action to be triggered in DNS tests can only be the default one, none. • Only the test-complete keyword is supported for the reaction trap command in a voice test. Configuration procedure To configure threshold monitoring: Step 1. Enter system view. 2. Enter NQA test group view. 3. Enter test type view of the test group. Command system-view Remarks N/A nqa entry admin-name operation-tag N/A type { dhcp | dlsw | dns | ftp | http | icmp-echo | snmp | tcp | udp-echo | udp-jitter | voice } N/A 113