HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 131
HTTP test configuration example, Network requirements, Configuration procedure,
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
[DeviceA] display nqa result admin test NQA entry (admin admin, tag test) test results: Destination IP address: 10.2.2.2 Send operation times: 1 Receive response times: 1 Min/Max/Average round trip time: 173/173/173 Square-Sum of round trip time: 29929 Last succeeded probe time: 2011-01-22 10:07:28.6 Extended results: Packet loss in test: 0% Failures due to timeout: 0 Failures due to disconnect: 0 Failures due to no connection: 0 Failures due to sequence error: 0 Failures due to internal error: 0 Failures due to other errors: 0 Packet(s) arrived late: 0 # Display the history of FTP tests. [DeviceA] display nqa history admin test NQA entry (admin admin, tag test) history record(s): Index Response Status Time 1 173 Succeeded 2011-01-22 10:07:28.6 HTTP test configuration example Network requirements As shown in Figure 42, configure NQA HTTP tests to test the connection with a specific HTTP server and the time required to obtain data from the HTTP server. Figure 42 Network diagram Configuration procedure Before you make the configuration, make sure the devices can reach each other. # Create an HTTP test group. system-view [DeviceA] nqa entry admin test [DeviceA-nqa-admin-test] type http # Specify the IP address of the HTTP server 10.2.2.2 as the destination IP address for HTTP tests. [DeviceA-nqa-admin-test-http] destination ip 10.2.2.2 # Configure the device to get data from the HTTP server for each HTTP probe operation. (get is the default HTTP operation type, and this step is optional.) [DeviceA-nqa-admin-test-http] operation get # Configure HTTP tests to visit website /index.htm. 124