HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 137
UDP echo test configuration example, Network requirements
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
# Create a TCP test group. system-view [DeviceA] nqa entry admin test [DeviceA-nqa-admin-test] type tcp # Configure TCP probe packets to use 10.2.2.2 as the destination IP address and port 9000 as the destination port. [DeviceA-nqa-admin-test-tcp] destination ip 10.2.2.2 [DeviceA-nqa-admin-test-tcp] destination port 9000 # Enable the saving of history records. [DeviceA-nqa-admin-test-tcp] history-record enable [DeviceA-nqa-admin-test-tcp] quit # Start TCP tests. [DeviceA] nqa schedule admin test start-time now lifetime forever # Stop the TCP tests after a period of time. [DeviceA] undo nqa schedule admin test # Display the results of the last TCP test. [DeviceA] display nqa result admin test NQA entry (admin admin, tag test) test results: Destination IP address: 10.2.2.2 Send operation times: 1 Receive response times: 1 Min/Max/Average round trip time: 13/13/13 Square-Sum of round trip time: 169 Last succeeded probe time: 2011-01-22 10:27:25.1 Extended results: Packet loss in test: 0% Failures due to timeout: 0 Failures due to disconnect: 0 Failures due to no connection: 0 Failures due to sequence error: 0 Failures due to internal error: 0 Failures due to other errors: 0 Packet(s) arrived late: 0 # Display the history of TCP tests. [DeviceA] display nqa history admin test NQA entry (admin admin, tag test) history record(s): Index Response Status Time 1 13 Succeeded 2011-01-22 10:27:25.1 UDP echo test configuration example Network requirements As shown in Figure 46, configure NQA UDP echo tests to test the round-trip time between Device A and Device B. The destination port number is 8000. 130