HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 52
Outputting system information to the Web interface
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Step Command Remarks 2. Enable the information center. info-center enable Optional. Enabled by default. 3. Name the channel with a specified channel number. 4. Configure the channel through which system information can be output to the SNMP module. info-center channel channel-number name channel-name info-center snmp channel { channel-number | channel-name } Optional. See Table 2 for default channel names. Optional. By default, system information is output to the SNMP module through channel 5 (known as snmpagent). info-center source { module-name | 5. Configure a system default } channel { channel-number | Optional. formation output rule for the SNMP module. channel-name } [ debug { level severity | state state } * | log { level severity | state state } * | trap { level severity | See "Default output rules of system information." state state } * ] * 6. Configure the timestamp info-center timestamp { debugging | format. log | trap } { boot | date | none } Optional. The time stamp format for system information is date by default. Outputting system information to the Web interface The Web interface only receives log information, and discards trap and debug information. This feature allows you to control whether to output system information to the Web interface and, if so, which system information can be output to the Web interface. The Web interface provides search and sorting functions. You can view system information by clicking corresponding tabs after logging in to the device through the Web interface. To output system information to the Web interface: Step 1. Enter system view. Command system-view 2. Enable the information center. info-center enable 3. Name the channel with a specified info-center channel channel-number channel number. name channel-name 4. Configure the channel through which system info-center syslog channel information can be { channel-number | channel-name } output to the Web interface. Remarks N/A Optional. Enabled by default. Optional. See Table 2 for default channel names. Optional. By default, system information is output to the Web interface through channel 6. 45