HP 6125G HP 6125G & 6125G/XG Blade Switches Network Management and Mon - Page 71
SNMP logging configuration example, Network requirements, Configuration procedure
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Request binding: 1: 1.3.6.1.2.1.11.29.0 Response binding: 1: Oid=snmpOutTraps.0 Syntax=CNTR32 Value=18 Get finished # Try to get the device name from the agent. The get attempt fails because the NMS has no access right to the node. Send request to 1.1.1.1/161 ... Protocol version: SNMPv3 Operation: Get Request binding: 1: 1.3.6.1.2.1.1.5.0 Response binding: 1: Oid=sysName.0 Syntax=noSuchObject Value=NULL Get finished # Execute the shutdown or undo shutdown command on an idle interface on the agent. You can see the interface state change traps on the NMS: 1.1.1.1/3374 V3 Trap = linkdown SNMP Version = V3 Community = managev3user Command = Trap 1.1.1.1/3374 V3 Trap = linkup SNMP Version = V3 Community = managev3user Command = Trap SNMP logging configuration example Network requirements Configure the SNMP agent (1.1.1.1/24) in Figure 26 to log the SNMP operations performed by the NMS. Figure 26 Network diagram Configuration procedure This example assumes you have configured all required SNMP settings for the NMS and the agent (see "SNMPv1/SNMPv2c configuration example" or "SNMPv3 configuration example"). 64