HP Color LaserJet CM4730 HP Color LaserJet CM4730 MFP - Software Technical Ref - Page 148

The Paper source: drop-down menu can contain the following options, depending on what has been installed on the MFP: ● Automatically Select ● Printer Auto Select ● Manual Feed in Tray 1 ● Tray 1 ● Tray 2 ● Tray 3 ● Tray 4 The default setting is Automatically Select. When this is selected, the HP Color LaserJet CM4730MFP uses the source tray that supports the selected media size. For the other options, make sure the correct media size is loaded in the source tray. For information about media sources, see Media attributes on page 282. Paper type: The Paper type: drop-down menu shows all of the media types that the HP Color LaserJet CM4730MFP supports. When you use the default setting, Unspecified, the MFP uses the default media type, which is usually Plain. No mechanism exists for manually adding custom media types through the driver. Custom types can be added only by using the bidirectional communication mechanism, so they must already exist in the MFP when the bidirectional query occurs. If bidirectional communication is enabled, an updated list of media types is returned. If bidirectional communication is not enabled, the driver looks for custom media types that have been saved from a previous bidirectional communication query, and uses those. Otherwise, no custom media types are available through the driver. The following standard types appear in the list: ● Unspecified ● Plain ● Preprinted ● Letterhead ● Transparency ● Prepunched ● Labels ● Bond ● Recycled ● Color ● Light (60-75 g/m2) ● Intermediate (90-104 g/m2) HP drivers for Windows 130 Chapter 4 HP PCL 6, PCL 5, and PS Emulation drivers for Microsoft Windows ENWW