HP Color LaserJet CM4730 HP Color LaserJet CM4730 MFP - Software Technical Ref - Page 85
Searching, Printers Found, Firewall Detected, - scanning
View all HP Color LaserJet CM4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
NOTE: Wired networking refers to the device being connected to the network by a network cable. For wireless installation instructions using an HP Jetdirect ew2400 802.11g wireless print server or an HP Direct 380x802.11B wireless print server, consult the documentation that comes with the print server. Click Next to continue. The Searching dialog box opens, as shown in the following figure. Figure 3-5 Searching dialog box Microsoft Windows install NOTE: When installing the device over a network, allow the search for the first subnet in the network to finish finding all available devices. After the first subnet is scanned for available HP Color LaserJet CM4730MFPs, the results appear in the Printers Found dialog box. However, the installer continues to search the network for additional devices. The results of the first search appear within about 20 seconds, and then the search of the other subnets occurs. The results appear in the Printers Found dialog box (see Figure 3-8 Printers Found dialog box on page 69). NOTE: If the device does not appear, the installation process includes the option of using the TCP/IP address for the HP Color LaserJet CM4730MFP, which might be preferable to waiting for the installer to finish the search. If the network has a firewall that is blocking the installation, the Firewall Detected dialog box appears, as shown in the following figure. Figure 3-6 Firewall Detected dialog box ENWW Print-driver installation instructions 67