HP Color LaserJet CM4730 HP Color LaserJet CM4730 MFP - Software Technical Ref - Page 92
Use Default Port Name, Set Port Name
View all HP Color LaserJet CM4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Microsoft Windows install If information in the IP Address:, Subnet Mask:, or Gateway: fields change, click Suggest Settings.... The fields refresh with information that was found by the installer and reported in the Printer Found screen. Type a different IP Address:, Subnet Mask:, or Gateway: address and then click Next to open the Confirm Network Settings dialog box (see Figure 3-10 Confirm Network Settings dialog box on page 71). If you clear the Use Default Port Name check box and click Next, the Set Port Name dialog box opens (see Figure 3-16 Set Port Name dialog box on page 77). The Check Printer Connection dialog box, which appears when No, I want to install a different printer is selected in the Printer Found dialog box or if the system failed to detect the device over the network, is shown in the following figure. Figure 3-13 Check Printer Connection dialog box 74 Chapter 3 Install Microsoft Windows printing-system components ENWW