HP Color LaserJet CM4730 HP Color LaserJet CM4730 MFP - Software Technical Ref - Page 290
Remote firmware update through the HP Embedded Web Server, Device Group Tools
View all HP Color LaserJet CM4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
Engineering Details 8. Refresh the browser. 9. Select the .RFU file from the Printer Firmware Update drop-down menu. 10. Click Update Firmware. HP Web Jetadmin sends the selected .RFU file to the product. 11. The download process begins and the firmware is updated on the product. This can take several minutes. Let the process finish without further interaction with the product or the computer. The messages described in the section Printer messages during the firmware update on page 263 appear on the control panel. NOTE: The product automatically turns off and then on again to activate the update; this can happen more than once. At the end of the update process, the READY message appears on the control panel. Do not turn off the product or interfere with the update until you see this message. 12. Print a configuration page and verify that the firmware revision number matches the revision of the current update. HP Web Jetadmin V7.8 and later can also be used to perform multiple or unattended installations. Complete the following steps for multiple or unattended installations. 1. Start HP Web Jetadmin. 2. Create a MFP group. A simple way to do this is to follow these steps: a. Click Device Management, and then click All Devices. -or- b. Shift-click to select products that you want to be included in the group, and then click OK. -or- c. When prompted, type a name for the new MFP group, and then click OK. 3. To modify several products in a group, click the group name, and then click Open. 4. The drop-down menu for Device Group Tools appears on the right side of the window. Scroll if necessary to view it. 5. In the Device Group Tools drop-down box, select an action. Type the appropriate information. Click Return to Device Group when finished. Remote firmware update through the HP Embedded Web Server CAUTION: Use extreme caution when using this method. Only use this method as a last resort. CAUTION: When trying to install or update firmware, do NOT use any buttons, browse to another site, close or touch the browser page in any way until the device has reset and displays Ready. 1. Open the HP Embedded Web Server (HP EWS). 2. In the Information tab, click the Print menu item. 3. Click Browse and navigate to the RFU file. 4. Click Apply. 272 Chapter 6 Engineering Details ENWW