HP Color LaserJet CM4730 HP Color LaserJet CM4730 MFP - Software Technical Ref - Page 163
Manually print on both sides, Duplex Unit for 2-Sided Printing - fuser
View all HP Color LaserJet CM4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Models with a duplexer installed support smart duplexing. Smart duplexing increases printing performance by preventing one-page print jobs or single-sided pages of a duplexed print job from going through the duplexing unit. All media types support the smart duplexing feature, except for media types that cannot be printed on both sides (such as labels, transparencies, and envelopes) and the following media types: ● Prepunched ● Preprinted ● Letterhead When the media type is set to Unspecified, the smart duplexing feature is disabled. To achieve the best print quality when printing on the second side of the page, the MFP makes adjustments to its print modes. The MFP uses a group of settings (such as fuser temperature and print speed) to create an image that has the best possible quality for the selected media. This group of settings is known as print mode. Print-mode adjustments for the second side of a duplexed page are automatic. Manually print on both sides Select the Print on Both Sides (Manually) check box to print on the second side of the media for HP Color LaserJet CM4730MFP models that do not have a duplexing unit installed. Use this setting on all HP Color LaserJet CM4730MFP models for media types that the automatic duplexing unit does not support, such as thick media. Manually printing on the second side of a page is available in the HP PCL 6, PCL 5, or PS emulation drivers. If a duplexing unit is installed and manual duplexing is enabled in the driver, the MFP automatically prints on both sides of media types that are supported for automatic duplexing (Letter, A4, Legal, and 8.5 x 13 only), and forces manual printing on both sides for media types that are not supported. To make the Print on Both Sides (Manually) check box available in the document options, select the Allow Manual Duplexing option on the Device Settings tab on the Properties print-driver tabs. To print on both sides manually while using media that is supported for automatic duplexing, select and apply the Not Installed setting on the Duplex Unit (for 2-Sided Printing) option on the Device Settings tab. Select the media type that you are using for the print job. The following media types have different print modes when you manually print on the second side: ● Plain ● Preprinted ● Letterhead ● Prepunched ● Bond ● Recycled ● Color ● Rough HP drivers for Windows ENWW Finishing tab features 145