HP DL360 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide - Page 108
Table F-1, Operating and Performance Specifications, Server Specifications
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Server Specifications Table F-1: Operating and Performance Specifications continued Specifications Power supply output Rated steady-state power 325 W - Maximum peak power 325 W - Temperature range Operating (See note) 10°C to 35°C 50°F to 95°F Shipping (See note) -40°C to 70°C -40°F to 158°F Relative humidity (noncondensing) Operating (See note) 10% to 90% - Non-operating (See note) Maximum wet bulb temperature 5% to 95% 28°C - 82.4°F NOTE: Operating temperature has an altitude derating of 1°C per 304.8 M (1,000 ft). No direct sunlight. Storage maximum humidity of 95% is based on a maximum temperature of 45°C. Altitude minimum for storage is 70 KPa. F-2 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
Server Specifications
F-2
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
Table F-1:
Operating and Performance Specifications
continued
Specifications
Power supply output
Rated steady-state power
325 W
—
Maximum peak power
325 W
—
Temperature
range
Operating (See note)
10
°
C to 35
°
C
50
°
F to 95
°
F
Shipping (See note)
-40
°
C to 70
°
C
-40
°
F to 158
°
F
Relative humidity (noncondensing)
Operating (See note)
10% to 90%
—
Non-operating (See note)
5% to 95%
—
Maximum wet bulb temperature
28
°
C
82.4
°
F
NOTE:
Operating temperature has an altitude derating of 1
°
C per 304.8 M
(1,000 ft). No direct sunlight. Storage maximum humidity of 95% is based on a
maximum temperature of 45
°
C. Altitude minimum for storage is 70 KPa.