HP DL360 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide - Page 110
Components in Installing Hardware Options., battery. See
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Battery 4. Remove the existing battery. Figure G-1: Removing the system battery 5. Install the new battery. 6. Reinstall the Battery-Backed Write Cache enabler battery pack. 7. Reverse the procedures performed in the "Accessing Internal Server Components" section in Chapter 2, "Installing Hardware Options." 8. Run the ROM-Based Setup Utility to reconfigure the system with the new battery. See Chapter 4, "Server Configuration and Utilities." G-2 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
Battery
G-2
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
4.
Remove the existing battery.
Figure G-1:
Removing the system battery
5.
Install the new battery.
6.
Reinstall the Battery-Backed Write Cache enabler battery pack.
7.
Reverse the procedures performed in the “Accessing Internal Server
Components” section in Chapter 2, “Installing Hardware Options.”
8.
Run the ROM-Based Setup Utility to reconfigure the system with the new
battery. See Chapter 4, “Server Configuration and Utilities.”