HP DL360 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide - Page 109
Appendix G: Battery, Battery Replacement
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
G Battery The HP ProLiant DL360 Generation 3 server has one memory device that requires a battery for retaining stored information. When the server no longer automatically displays the correct date and time, the battery that provides power to the real-time clock may need replacement. With normal use, battery life is usually about 5 to 10 years. Replace used batteries with HP 540-milliampere-hour lithium, 3 V replacement batteries (P/N 179322-001). Battery Replacement WARNING: To reduce the risk of electric shock or equipment damage: • Do not disable the power cord grounding plug. The grounding plug is an important safety feature. • Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. • Disconnect power from the server or other product by unplugging the power cord from either the electrical outlet or the server or other product. To install a new battery: 1. Access internal server components. Refer to "Accessing Internal Server Components" in Chapter 2, "Installing Hardware Options." 2. Remove the Battery-Backed Write Cache enabler battery pack. 3. Locate the battery holder on the system board. Refer to Figure 2-4 and Table 2-1 in Chapter 2, "Installing Hardware Options." HP ProLiant DL360 Generation 3 Server Setup and Installation Guide G-1