HP DL360 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide - Page 51
Tighten the thumbscrews on the front panel by turning them clockwise to secure
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Server Installation CAUTION: Keep the server parallel to the floor when sliding the fixed server rails into the rack rails. Tilting the server can damage the rails. 3. Insert the server into the rack. Be sure that the fixed server rails slide inside the universal rack rails. 4. Slide the server fully into the rack. 5. Tighten the thumbscrews on the front panel by turning them clockwise to secure the server to the rack. 6. At the rear of the rack, fasten the thumbscrew that secures the cable tray to the universal rack rail. 3-6 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
Server Installation
3-6
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
CAUTION:
Keep the server parallel to the floor when sliding the fixed server rails
into the rack rails. Tilting the server can damage the rails.
3.
Insert the server into the rack. Be sure that the fixed server rails slide inside the
universal rack rails.
4.
Slide the server fully into the rack.
5.
Tighten the thumbscrews on the front panel by turning them clockwise to secure
the server to the rack.
6.
At the rear of the rack, fasten the thumbscrew that secures the cable tray to the
universal rack rail.