HP DL360 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide - Page 37
Install the heatsink with the adhesive side down 1., Close the heatsink retaining clips 2.
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installing Hardware Options CAUTION: If replacing an existing processor/heatsink assembly, be sure to discard the old heatsink. The heatsink is not reusable. 5. Install the heatsink with the adhesive side down (1). CAUTION: Before closing the heatsink retaining clip, be sure that the processor socket locking lever is closed. Do not force the lever closed; it should close without resistance. Forcing the lever closed may result in damage to the processor socket, requiring replacement of the system board. 6. Close the heatsink retaining clips (2). Figure 2-14: Installing the heatsink 2-18 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
Installing Hardware Options
2-18
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
CAUTION:
If replacing an existing processor/heatsink assembly, be sure to
discard the old heatsink. The heatsink is not reusable.
5.
Install the heatsink with the adhesive side down (1).
CAUTION:
Before closing the heatsink retaining clip, be sure that the processor
socket locking lever is closed. Do not force the lever closed; it should close
without resistance. Forcing the lever closed may result in damage to the
processor socket, requiring replacement of the system board.
6.
Close the heatsink retaining clips (2).
Figure 2-14:
Installing the heatsink