HP DL360 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide - Page 50
Installing the Server into the Rack, rack rails 2.
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Server Installation Installing the Server into the Rack CAUTION: To avoid destabilizing the rack, install multiple servers starting from the bottom of the rack. CAUTION: Always mount the heaviest item on the bottom of the rack, and work from the bottom to the top. To install the server into the rack: 1. Align the rear end of the fixed server rails (1), with the front end of the universal rack rails (2). WARNING: The rail release latches can pinch your fingertips. 2. Press the rail release latches and slowly slide the server into the rack. Figure 3-4: Aligning the rear end of the fixed server rails with the front end of the universal rack rails HP ProLiant DL360 Generation 3 Server Setup and Installation Guide 3-5
Server Installation
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
3-5
Installing the Server into the Rack
CAUTION:
To avoid destabilizing the rack, install multiple servers starting from the
bottom of the rack.
CAUTION:
Always mount the heaviest item on the bottom of the rack, and work
from the bottom to the top.
To install the server into the rack:
1.
Align the rear end of the fixed server rails (1), with the front end of the universal
rack rails (2).
WARNING:
The rail release latches can pinch your fingertips.
2.
Press the rail release latches and slowly slide the server into the rack.
Figure 3-4:
Aligning the rear end of the fixed server rails
with the front end of the universal rack rails