HP DL360 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide - Page 95
Problem, Possible Cause, Possible Solution, before
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Troubleshooting Table D-4: Problems After Initial Startup continued Problem Possible Cause Possible Solution Hard drive controller order is incorrect. Run RBSU by pressing the F9 key and correct this problem. Encountered problem after new hardware was added to the system. Refer to the documentation provided with the hardware. Remove the new hardware. Problem was encountered with hardware added to a system with a factory-installed operating system. The factory-installed operating system software installation must be completed before adding new hardware to the system. Be sure that all instructions provided in the HP Factory-Installed Operating System Software Installation Guide are being followed. Remove the new hardware and complete the software installation. Then, reinstall the new hardware. Note: Refer to Chapter 4, "Server Configuration and Utilities," or refer to the ROM-Based Setup Utility User Guide, for complete instructions on the use of RBSU. D-12 HP ProLiant DL360 Generation 3 Server Setup and Installation Guide HP CONFIDENTIAL Writer: Richard O. Heath File Name: i-appd Troubleshooting.doc Codename: Ertl Part Number: 293974-001 Last Saved On: 10/11/02 11:23 AM