HP Dc7100 HP Compaq Business Desktop dc7100 Series Service Reference Guide, 3r - Page 105
Remove the four guide screws two on each side from the old drive and install them in - cmt specifications
UPC - 829160356877
View all HP Dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis 8. In the minitower mode, pull up on the green drivelock mechanism 1 for that specific drive and slide the drive from the drive bay 2. 9. Remove the four guide screws (two on each side) from the old drive and install them in the lower set of holes on the optical drive. ✎ Extra guide screws are provided on the chassis on the side of the fourth drive bay. Optical drives use M3 metric screws. The HP-supplied metric screws are black. The HP-supplied standard screws are silver. Service Reference Guide, dc7100 361288-003 6-25
Service Reference Guide, dc7100
361288-003
6–25
Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis
8. In the minitower mode, pull up on the green drivelock mechanism
1
for that specific drive
and slide the drive from the drive bay
2
.
9. Remove the four guide screws (two on each side) from the old drive and install them in the
lower set of holes on the optical drive.
Extra guide screws are provided on the chassis on the side of the fourth drive bay. Optical drives
use M3 metric screws. The HP-supplied metric screws are black. The HP-supplied standard
screws are silver.