HP Dc7100 HP Compaq Business Desktop dc7100 Series Service Reference Guide, 3r - Page 164
then, push the drive cage into, Push the I/O device beneath the drive cage as far as possible
UPC - 829160356877
View all HP Dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Removal and Replacement Procedures- Small Form Factor (SFF) Chassis Follow these procedures for reinstalling the front I/O device. 1. Begin with the drive cage in its fully extended position. Guide the I/O device cables under the drive cage and through the legs of the drive cage support 1. It may be necessary to use a wooden pencil to help in this task. 2. Push the I/O device beneath the drive cage as far as possible 2 then, push the drive cage into the closed position to access the front of the chassis. Make sure the USB ports in the I/O device are oriented properly on the right side. 3. Install the two retaining screws 3 while holding the I/O device in position. 4. Reinstall the balance of the cabling and drives. 7-38 361288-003 Service Reference Guide, dc7100