HP Dc7100 HP Compaq Business Desktop dc7100 Series Service Reference Guide, 3r - Page 120
Changing from Desktop to Minitower
UPC - 829160356877
View all HP Dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis 6.23 Changing from Desktop to Minitower 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock it. 2. Prepare the computer for disassembly (Section 6.1). 3. Remove the computer access panel (Section 6.5). 4. Remove the front bezel (Section 6.6). 5. Disconnect all power and data cables from the back of the drives in the 5.25-inch drive bays. 6. To release the drives from the 5.25-inch drive bay, press down on the short yellow drivelock as shown. While pressing the drivelock, pull the drives out of the drive bay. 6-40 361288-003 Service Reference Guide, dc7100
6–40
361288-003
Service Reference Guide, dc7100
Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis
6.23 Changing from Desktop to Minitower
1. If you have locked the Smart Cover Lock, use Computer Setup to unlock it.
2. Prepare the computer for disassembly (Section
6.1
).
3. Remove the computer access panel (Section
6.5
).
4. Remove the front bezel (Section
6.6
).
5. Disconnect all power and data cables from the back of the drives in the 5.25-inch drive bays.
6. To release the drives from the 5.25-inch drive bay, press down on the short yellow drivelock
as shown. While pressing the drivelock, pull the drives out of the drive bay.