HP Dc7100 HP Compaq Business Desktop dc7100 Series Service Reference Guide, 3r - Page 208
Remove the four guide screws two on each side from the old drive. You will need these
UPC - 829160356877
View all HP Dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
Removal and Replacement Procedures - Ultra-Slim Desktop (USDT) Chassis 7. Pull the drive release lever away from the hard drive 1, then lift the cable-end of the drive 2 up and pull it towards the center of the chassis 3 to remove it from the drive cage. 8. Remove the four guide screws (two on each side) from the old drive. You will need these screws to install a new drive. 9. Store the removed drive in anti-static packaging. To install a drive, reverse the removal procedure. 8-20 361288-003 Service Reference Guide, dc7100
8–20
361288-003
Service Reference Guide, dc7100
Removal and Replacement Procedures - Ultra-Slim Desktop (USDT) Chassis
7.
Pull the drive release lever away from the hard drive
1
, then lift the cable-end of the drive
2
up and pull it towards the center of the chassis
3
to remove it from the drive cage.
8. Remove the four guide screws (two on each side) from the old drive. You will need these
screws to install a new drive.
9. Store the removed drive in anti-static packaging.
To install a drive, reverse the removal procedure.