HP Dc7100 HP Compaq Business Desktop dc7100 Series Service Reference Guide, 3r - Page 200
Memory, Remove the front panel assembly
UPC - 829160356877
View all HP Dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Removal and Replacement Procedures - Ultra-Slim Desktop (USDT) Chassis 8.10 Memory Ä CAUTION: The memory module sockets have gold metal contacts. When upgrading the memory, it is important to use memory modules with gold metal contacts to prevent corrosion and/or oxidation resulting from having incompatible metals in contact with each other. Ä CAUTION: Static electricity can damage the electronic components of the computer or optional cards. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. Refer to Chapter 5 for more information. Ä CAUTION: When handling a memory module, be careful not to touch any of the contacts. Doing so may damage the module. 1. Prepare the computer for disassembly (Section 8.1). 2. Remove the computer access panel (Section 8.3). Å WARNING: To reduce risk of personal injury from hot surfaces, allow the internal system components to cool before touching. 3. Remove any MultiBay device in the drive cage (Section 8.4). 4. Remove the MultiBay riser card (Section 8.5). 5. Remove the front panel assembly (Section 8.6). 6. Open both latches of the memory module socket 1, and insert the memory module into the socket 2. If you are replacing a memory module, place it in the socket vacated by its predecessor. Push the module down into the socket, ensuring that the module is fully inserted and properly seated. Make sure the latches are in the closed position 3. 8-12 361288-003 Service Reference Guide, dc7100