HP Dc7100 HP Compaq Business Desktop dc7100 Series Service Reference Guide, 3r - Page 177
Backwall, Preparation for Disassembly, Computer Cover, Vertically Oriented
UPC - 829160356877
View all HP Dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Removal and Replacement Procedures- Small Form Factor (SFF) Chassis 7.21 Backwall 1. Prepare the computer for disassembly (Section 7.1, "Preparation for Disassembly"). 2. Remove the computer cover (Section 7.5, "Computer Cover"). 3. Remove all PCI and PCI Express expansion boards (Section 7.9, "Vertically Oriented Expansion Card"). 4. Press down on the green latch located on the front of the chassis next to the drives 1. This disengages the drive cage. 5. Slide the drive cage forward until it stops 2. ✎ It is not necessary to remove any drives from the drive cage. The drive cage is moved only to gain working room. 6. Remove the power supply from the chassis (Section 7.18, "Power Supply"). 7. Disconnect all data and power cables from the system board except the cable to the heatsink. Service Reference Guide, dc7100 361288-003 7-51