HP Dc7100 HP Compaq Business Desktop dc7100 Series Service Reference Guide, 3r - Page 155
External 3.5-inch Drive, Unlocking the Smart Cover Lock
UPC - 829160356877
View all HP Dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Removal and Replacement Procedures- Small Form Factor (SFF) Chassis 7.11.3 External 3.5-inch Drive 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock. Refer to Section 7.2, "Unlocking the Smart Cover Lock". 2. Prepare the computer for disassembly. Refer to Section 7.1, "Preparation for Disassembly". 3. Remove the computer cover. Refer to Section 7.5, "Computer Cover". 4. Remove the optical drive. Refer to Section 7.11.2, "Optical Drive". 5. Disconnect the signal and power cables from the drive. The other end of the cables should remain connected to the system board. ✎ Diskette drive shown. 6. Slide the drive forward and lift it up and out of the drive cage. To replace the drive, transfer the four screws from the old drive to the new one and reverse the removal procedure. Service Reference Guide, dc7100 361288-003 7-29