HP Dc7100 HP Compaq Business Desktop dc7100 Series Service Reference Guide, 3r - Page 119
Power Supply
UPC - 829160356877
View all HP Dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis 6.22 Power Supply Å WARNING: Voltage is always present on the system board when the computer is plugged into an active AC outlet. To avoid possible personal injury and damage to the equipment the power cord should be disconnected from the computer and/or the AC outlet before opening the computer. 1. Prepare the computer for disassembly (Section 6.1). 1. Remove the computer access panel (Section 6.5). 2. Disconnect all power cables from the mass storage devices and from the system board. 3. Remove the four screws that connect the power supply to the chassis 1. 4. Slide the power supply toward the front of the computer, then lift it out of the computer 2. To install the power supply, reverse the removal procedure. Service Reference Guide, dc7100 361288-003 6-39