HP Dc7100 HP Compaq Business Desktop dc7100 Series Service Reference Guide, 3r - Page 248
Solving Diskette Problems, Problem, Cause, Solution, Start, Explore, File > Properties >, Tools
UPC - 829160356877
View all HP Dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
Solving Diskette Problems Solving Diskette Problems Problem Cause Diskette drive light stays on. Diskette is damaged. Drive not found. Diskette is incorrectly inserted. Drive button is not pushed in. Files on diskette are damaged. Drive cable is not properly connected. Cable is loose. Diskette drive cannot write to a diskette. Removable drive is not seated properly. You attempted to hot plug a removable hard drive that has DriveLock security enabled. (This feature supported on select models only.) Diskette is not formatted. Diskette is write-protected. Writing to the wrong drive. Not enough space is left on the diskette. Diskette write control is enabled. Cannot format diskette. Diskette is damaged. Invalid media reported. Solution In Microsoft Windows XP, right-click Start, click Explore, and select a drive. Select File > Properties > Tools. Under Error-checking, click Check Now. Remove diskette and reinsert. Push in drive button. Check the program diskettes. Reconnect power cable. Ensure that all four pins are connected. Reseat diskette drive data and power cables. Reseat the drive. Shut down the computer. Insert the drive into the MultiBay, if it is not already inserted. Turn on the computer. Format the diskette. Use another diskette or remove the write protection. Check the drive letter in the path statement. Use another diskette. Use Computer Setup to check the storage security feature disabled settings. Replace the damaged disk. When formatting a disk in MS-DOS, you may need to specify diskette capacity. For example, to format a 1.44-MB diskette, type the following command at the MS-DOS prompt: FORMAT A: /F:1440 D-6 361288-003 Service Reference Guide, dc7100