HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600-
HP StorageWorks 8/80 - SAN Switch Manual
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 8/80 manual content summary:
- HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 1
53-1000600-02 12 March 2008 Fabric OS Message Reference Supporting Fabric OS v6.1.0 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 2
. Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time, without notice - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 3
Manual June 2006 Fabric OS Message Reference 53-1000242-01 -Updated for Fabric OS v5.2.0: -changed doc title and number Introductory chapters. -Update throughout: rebranding, supported hardware, CLI changes. 15 June 2007 Fabric 12 March 2008 Fabric OS Message Reference iii 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 4
iv Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 5
In this chapter xlvii How this document is organized xlvii Supported hardware and software xlvii What's new in this document xlviii 1 Event Auditing 2 System Logging Daemon (syslogd 3 System Console 3 Port Logs 4 Viewing and Configuring System Message Logs 4 Viewing System Messages from - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 6
Responding to a System Message 11 Looking Up a System Message 11 Gathering Information About the Problem 12 Support 12 Panic Dump and Core Dump Files 12 Trace Dumps 13 supportSave Command 13 System Module Descriptions 13 Section I RASLog Messages Chapter 2 AG System Messages AG-1001 23 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 7
Chapter 3 AG-1026 30 AG-1027 30 AG-1028 30 AUTH System Messages AUTH-1001 31 AUTH-1002 31 AUTH-1003 31 AUTH-1004 32 AUTH-1005 32 AUTH-1006 32 AUTH-1007 32 AUTH-1008 33 AUTH-1010 33 AUTH-1011 33 AUTH-1012 34 AUTH-1013 34 AUTH-1014 34 AUTH-1016 34 AUTH-1017 35 AUTH-1018 35 AUTH- - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 8
Chapter 4 Chapter 5 AUTH-1038 41 AUTH-1039 41 AUTH-1040 42 AUTH-1041 42 AUTH-1042 42 AUTH-1043 43 AUTH-1044 43 BKSW System Messages BKSW-1003 45 BL System Messages BL-1000 47 BL-1001 47 BL-1002 47 BL-1003 48 BL-1004 48 BL-1006 48 BL-1007 49 BL-1008 49 BL-1009 49 BL-1010 50 BL-1011 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 9
Chapter 6 Chapter 7 Chapter 8 BL-1026 55 BL-1027 56 BL-1028 56 BL-1029 56 BL-1030 57 BL-1031 57 BL-1032 57 BL-1033 57 BL-1034 58 BL-1035 58 BL-1036 58 BL-1037 59 BLL System Messages BLL-1000 61 BM System Messages BM-1001 63 BM-1002 63 BM-1003 63 BM-1004 64 BM-1005 64 BM-1006 64 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 10
73 Chapter 11 CONF System Messages CONF-1000 75 CONF-1001 75 CONF-1020 75 CONF-1021 76 CONF-1022 76 CONF-1030 76 Chapter 12 EM System Messages EM-1001 77 EM-1002 77 EM-1003 77 EM-1004 78 EM-1005 78 EM-1006 79 EM-1007 79 EM - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 11
EM-1029 83 EM-1031 83 EM-1033 84 EM-1034 84 EM-1035 84 EM-1036 85 EM-1037 85 EM-1041 86 EM-1042 86 EM-1043 86 EM-1044 86 EM-1045 87 EM-1046 87 EM-1047 87 EM-1048 88 EM-1049 88 EM-1050 88 EM-1051 88 EM-1055 89 EM-1056 89 EM-1057 89 EM-1058 90 EM-1059 90 EM-1060 90 EM-1061 91 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 12
ESS-1005 96 Chapter 14 EVMD System Messages EVMD-1001 97 Chapter 15 FABR System Messages FABR-1001 99 FABR-1002 99 FABR-1003 99 FABR-1004 100 FABR-1005 100 FABR-1006 100 FABR-1007 101 FABR-1008 101 FABR-1009 101 FABR-1010 102 FABR-1011 102 FABR-1012 102 FABR-1013 103 FABR-1014 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 13
FABR-1037 109 FABR-1038 109 FABR-1039 109 Chapter 16 FABS System Messages FABS-1001 111 FABS-1002 111 FABS-1004 111 FABS-1005 112 FABS-1006 112 FABS-1007 112 FABS-1008 113 FABS-1009 113 FABS-1010 113 FABS-1011 113 FABS-1012 114 FABS-1013 114 FABS-1014 114 FABS-1015 115 Chapter 17 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 14
Chapter 22 FCR System Messages FCR-1001 127 FCR-1002 127 FCR-1003 127 FCR-1004 127 FCR-1005 128 FCR-1006 128 FCR-1007 128 FCR-1008 128 FCR-1009 129 FCR-1010 129 FCR-1011 129 FCR-1012 130 FCR-1013 130 FCR-1015 130 FCR-1016 130 FCR-1018 131 FCR-1019 131 FCR-1020 131 FCR-1021 132 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 15
Fabric OS Message Reference 53-1000600-02 FCR-1039 137 FCR-1040 137 FCR-1041 137 FCR-1042 138 FCR-1043 138 FCR-1048 138 FCR-1049 138 FCR-1053 139 FCR-1054 139 FCR-1055 139 FCR-1056 140 FCR-1057 140 FCR-1058 140 FCR-1059 141 FCR-1060 141 FCR-1061 141 FCR-1062 141 FCR-1063 142 FCR- - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 16
FCR-1083 148 FCR-1084 148 Chapter 23 FICON System Messages FICN-1003 149 FICN-1004 149 FICN-1005 150 FICN-1006 150 FICN-1007 150 FICN-1008 151 FICN-1009 151 FICN-1010 151 FICN-1011 151 FICN-1012 152 FICN-1013 152 FICN-1014 152 FICN-1015 153 FICN-1016 153 FICN-1017 153 FICN-1018 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 17
Fabric OS Message Reference 53-1000600-02 FICN-1036 158 FICN-1037 158 FICN-1038 159 FICN-1039 159 FICN-1040 159 FICN-1041 160 FICN-1042 160 FICN-1043 160 FICN-1044 160 FICN-1045 161 FICN-1046 161 FICN-1047 161 FICN-1048 162 FICN-1049 162 FICN-1050 162 FICN-1051 162 FICN-1052 163 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 18
FICN-1073 168 FICN-1074 169 FICN-1075 169 FICN-1076 169 FICN-1077 170 FICN-1078 170 FICN-1079 170 FICN-1080 171 FICN-1081 171 FICN-1082 171 FICN-1083 171 FICN-1084 172 FICN-1085 172 FICN-1086 172 Chapter 24 FICU System Messages FICU-1001 173 FICU-1002 173 FICU-1003 173 FICU-1004 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 19
Chapter 27 FSPF System Messages FSPF-1001 181 FSPF-1002 181 FSPF-1003 181 FSPF-1005 182 FSPF-1006 182 Chapter 28 FSS System Messages FSS-1001 183 FSS-1002 183 FSS-1003 183 FSS-1004 184 FSS-1005 184 FSS-1006 184 FSS-1007 184 Chapter 29 FSSM System Messages FSSM-1002 187 FSSM-1003 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 20
FW-1037 193 FW-1038 194 FW-1039 194 FW-1040 194 FW-1041 195 FW-1042 195 FW-1043 195 FW-1044 196 FW-1045 196 FW-1046 196 FW-1047 196 FW-1048 197 FW-1049 197 FW-1050 197 FW-1051 198 FW-1052 198 FW-1113 198 FW-1114 198 FW-1115 199 FW-1116 199 FW-1117 199 FW-1118 200 FW-1119 200 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 21
Fabric OS Message Reference 53-1000600-02 FW-1134 205 FW-1135 206 FW-1136 206 FW-1137 206 FW-1138 206 FW-1139 207 FW-1140 207 FW-1160 207 FW-1161 208 FW-1162 208 FW-1163 208 FW-1164 209 FW-1165 209 FW-1166 209 FW-1167 210 FW-1168 210 FW-1169 210 FW-1170 211 FW-1171 211 FW-1172 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 22
FW-1190 217 FW-1191 217 FW-1192 217 FW-1193 218 FW-1194 218 FW-1195 218 FW-1216 219 FW-1217 219 FW-1218 219 FW-1219 220 FW-1240 220 FW-1241 220 FW-1242 221 FW-1243 221 FW-1244 221 FW-1245 222 FW-1246 222 FW-1247 222 FW-1248 223 FW-1249 223 FW-1250 223 FW-1251 224 FW-1272 224 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 23
Fabric OS Message Reference 53-1000600-02 FW-1307 229 FW-1308 229 FW-1309 229 FW-1310 230 FW-1311 230 FW-1312 230 FW-1313 231 FW-1314 231 FW-1315 231 FW-1316 232 FW-1317 232 FW-1318 232 FW-1319 233 FW-1320 233 FW-1321 233 FW-1322 234 FW-1323 234 FW-1324 234 FW-1325 235 FW-1326 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 24
FW-1344 241 FW-1345 241 FW-1346 242 FW-1347 242 FW-1348 243 FW-1349 243 FW-1350 243 FW-1351 244 FW-1352 244 FW-1353 244 FW-1354 245 FW-1355 245 FW-1356 246 FW-1357 246 FW-1358 246 FW-1359 247 FW-1360 247 FW-1361 247 FW-1362 248 FW-1363 248 FW-1364 248 FW-1365 248 FW-1366 249 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 25
FW-1401 254 FW-1402 254 FW-1403 255 FW-1424 255 FW-1425 255 FW-1426 255 FW-1427 256 FW-1428 256 FW-1429 256 FW-1430 257 FW-1431 257 FW-1432 257 FW-1433 257 FW-1434 258 FW-1435 258 FW-1436 258 FW-1437 259 FW-1438 259 FW-1439 259 FW-1440 260 FW-1441 260 FW-1442 260 FW-1443 260 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 26
Chapter 32 HAMK System Messages HAMK-1001 267 HAMK-1002 267 HAMK-1003 267 HAMK-1004 268 Chapter 33 HIL System Messages HIL-1101 269 HIL-1102 269 HIL-1103 269 HIL-1104 270 HIL-1105 270 HIL-1106 270 HIL-1107 271 HIL-1108 271 HIL-1201 271 HIL-1202 272 HIL-1203 272 HIL-1204 272 HIL- - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 27
HIL-1501 277 HIL-1502 278 HIL-1503 278 HIL-1504 278 HIL-1505 279 HIL-1506 279 HIL-1507 279 HIL-1508 280 HIL-1509 280 HIL-1510 280 HIL-1601 281 HIL-1602 281 HIL-1603 281 HIL-1650 281 Chapter 34 HLO System Messages HLO-1001 283 HLO-1002 283 HLO-1003 283 Chapter 35 HMON System - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 28
ICPD-1002 293 ICPD-1003 293 ICPD-1004 293 ICPD-1005 294 ICPD-1006 294 ICPD-1007 294 ICPD-1008 294 Chapter 40 IPAD System Messages IPAD-1000 297 IPAD-1001 297 Chapter 41 IPS System Messages IPS-1001 299 IPS-1002 299 IPS-1003 299 IPS-1004 299 IPS-1005 300 IPS-1006 300 Chapter 42 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 29
Chapter 44 KSWD System Messages KSWD-1003 307 Chapter 45 KTRC System Messages KTRC-1001 309 KTRC-1002 309 KTRC-1003 309 KTRC-1004 309 KTRC-1005 310 Chapter 46 LOG System Messages LOG-1000 311 LOG-1001 311 LOG-1002 311 LOG-1003 312 Chapter 47 LSDB System Messages LSDB-1001 313 LSDB- - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 30
MS-1003 322 MS-1004 322 MS-1005 323 MS-1006 323 MS-1008 323 MS-1009 324 MS-1021 324 MS-1022 324 MS-1023 325 MS-1024 325 Chapter 52 NBFS System Messages NBFS-1001 327 NBFS-1002 327 NBFS-1003 328 Chapter 53 NS System Messages NS-1001 329 NS-1002 329 NS-1003 329 NS-1004 330 NS-1005 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 31
PDTR-1002 339 Chapter 56 PLAT System Messages PLAT-1000 341 PLAT-1001 341 PLAT-1002 341 PLAT-1003 342 Chapter 57 PORT System Messages PORT-1003 343 PORT-1004 343 PORT-1005 343 Chapter 58 PS System Messages PS-1000 345 PS-1001 345 PS-1002 345 PS-1003 345 PS-1004 346 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 32
Chapter 60 RAS System Messages RAS-1001 349 RAS-1002 349 RAS-1004 349 RAS-1005 349 RAS-1006 350 RAS-2001 350 RAS-2002 350 RAS-2003 350 RAS-3001 351 RAS-3002 351 RAS-3003 351 RAS-3004 351 Chapter 61 RCS System Messages RCS-1001 353 RCS-1002 353 RCS-1003 353 RCS-1004 354 RCS-1005 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 33
Chapter 64 SAS System Messages SAS-1001 361 Chapter 65 SCN System Messages SCN-1001 363 Chapter 66 SEC System Messages SEC-1001 365 SEC-1002 365 SEC-1003 366 SEC-1005 366 SEC-1006 366 SEC-1007 367 SEC-1008 367 SEC-1009 367 SEC-1016 367 SEC-1022 368 SEC-1024 368 SEC-1025 368 SEC- - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 34
SEC-1046 374 SEC-1049 374 SEC-1050 374 SEC-1051 375 SEC-1052 375 SEC-1053 375 SEC-1054 376 SEC-1055 376 SEC-1056 376 SEC-1057 377 SEC-1059 377 SEC-1062 377 SEC-1063 377 SEC-1064 378 SEC-1065 378 SEC-1069 378 SEC-1071 378 SEC-1072 379 SEC-1073 379 SEC-1074 379 SEC-1075 379 SEC- - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 35
Fabric OS Message Reference 53-1000600-02 SEC-1092 384 SEC-1093 384 SEC-1094 385 SEC-1095 385 SEC-1096 385 SEC-1097 386 SEC-1098 386 SEC-1099 386 SEC-1100 386 SEC-1101 387 SEC-1102 387 SEC-1104 387 SEC-1105 388 SEC-1106 388 SEC-1107 388 SEC-1108 389 SEC-1110 389 SEC-1111 389 SEC- - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 36
SEC-1142 395 SEC-1145 395 SEC-1146 396 SEC-1153 396 SEC-1154 396 SEC-1155 397 SEC-1156 397 SEC-1157 397 SEC-1158 397 SEC-1159 398 SEC-1160 398 SEC-1163 398 SEC-1164 399 SEC-1165 399 SEC-1166 399 SEC-1167 399 SEC-1168 400 SEC-1170 400 SEC-1171 400 SEC-1172 401 SEC-1173 401 SEC- - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 37
Fabric OS Message Reference 53-1000600-02 SEC-1193 406 SEC-1194 406 SEC-1195 406 SEC-1196 407 SEC-1197 407 SEC-1198 407 SEC-1199 408 SEC-1200 408 SEC-1201 408 SEC-1202 409 SEC-1203 409 SEC-1250 409 SEC-1251 409 SEC-1253 410 SEC-1300 410 SEC-1301 410 SEC-1302 410 SEC-1303 411 SEC- - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 38
xxxviii SEC-1323 416 SEC-1324 417 SEC-1325 417 SEC-1326 417 SEC-1327 417 SEC-1328 418 SEC-1329 418 SEC-1330 418 SEC-1331 419 SEC-1332 419 Chapter 67 SNMP System Messages SNMP-1001 421 SNMP-1002 421 SNMP-1003 421 SNMP-1004 422 SNMP-1005 422 SNMP-1006 422 Chapter 68 SS System - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 39
SULB-1018 434 SULB-1020 434 SULB-1021 434 SULB-1022 435 SULB-1023 435 SULB-1024 435 SULB-1025 436 SULB-1026 436 SULB-1030 436 SULB-1031 436 SULB-1033 437 SULB-1034 437 SULB-1035 437 SULB-1036 438 SULB-1037 438 Chapter 70 SWCH System Messages SWCH-1001 439 SWCH-1002 439 SWCH-1003 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 40
SYSM-1002 445 SYSM-1003 445 SYSM-1004 446 SYSM-1005 446 SYSM-1006 446 SYSM-1007 446 Chapter 73 TRCE System Messages TRCE-1001 447 TRCE-1002 447 TRCE-1003 447 TRCE-1004 448 TRCE-1005 448 TRCE-1006 448 TRCE-1007 449 TRCE-1008 449 TRCE-1009 449 TRCE-1010 449 TRCE-1011 450 TRCE-1012 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 41
UCST-1007 457 UCST-1020 457 Chapter 77 UPTH System Messages UPTH-1001 459 Chapter 78 WEBD System Messages WEBD-1001 461 WEBD-1002 461 WEBD-1004 461 WEBD-1005 461 WEBD-1006 462 WEBD-1007 462 WEBD-1008 462 Chapter 79 ZOLB System Messages ZOLB-1001 463 Chapter 80 ZONE System Messages - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 42
ZONE-1027 471 ZONE-1028 471 ZONE-1029 471 ZONE-1030 472 ZONE-1031 472 ZONE-1032 472 ZONE-1033 472 ZONE-1034 473 ZONE-1035 473 ZONE-1036 473 ZONE-1037 474 ZONE-1038 474 ZONE-1039 474 ZONE-1040 474 ZONE-1041 475 ZONE-1042 475 ZONE-1043 475 ZONE-1044 475 ZONE-1045 476 ZONE-1046 476 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 43
Chapter 4 Chapter 5 Chapter 6 CONF-1022 483 AUDIT FW System Messages FW-3001 485 AUDIT HTTP System Messages HTTP-1002 487 HTTP-1003 487 AUDIT SEC System Messages SEC-3001 489 SEC-3002 489 SEC-3003 489 SEC-3004 490 SEC-3005 490 SEC-3006 490 SEC-3007 491 SEC-3008 491 SEC-3009 491 SEC- - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 44
Chapter 7 Chapter 8 SEC-3029 498 SEC-3030 498 SEC-3031 498 SEC-3032 499 SEC-3033 499 SEC-3034 499 SEC-3035 499 SEC-3036 500 SEC-3037 500 SEC-3038 500 SEC-3039 501 SEC-3040 501 SEC-3041 501 SEC-3044 501 SEC-3045 502 SEC-3046 502 SEC-3047 502 SEC-3048 502 SEC-3049 503 SEC-3050 503 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 45
Chapter 9 SULB-1023 515 SULB-1024 516 SULB-1026 516 SULB-1030 516 SULB-1031 517 SULB-1032 517 SULB-1033 517 SULB-1034 517 SULB-1035 518 SULB-1037 518 AUDIT ZONE System Messages ZONE-3001 519 ZONE-3002 519 ZONE-3003 519 ZONE-3004 520 ZONE-3005 520 ZONE-3006 520 ZONE-3007 521 ZONE- - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 46
xlvi Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 47
which procedures or parts of procedures documented here apply to some switches but not to others, this guide identifies exactly which switches are supported and which are not. Although many different software and hardware configurations are tested and supported by Brocade Communications Systems, Inc - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 48
4100, 4900, 5000, 7500, AP 7600 switches • Brocade 24000 director • Brocade 48000 director • FA4-16 blade • FC10-6 blade What's new in this document The following changes have been made since this document was last released: • Information - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 49
of user-manipulated in the narrative portions of this guide are presented in mixed lettercase: The following notices and statements are used in this manual. They are listed below in order of increasing For definitions specific to Brocade and Fibre Channel, see the Brocade Glossary. For definitions of - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 50
For information about the Fibre Channel industry, visit the Fibre Channel Industry Association Web site: http://www.fibrechannel.org Getting technical help Contact your switch support supplier for hardware, firmware, and software support, including product repairs and part ordering. To expedite your - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 51
FT00X0054E9* FT00X0054E9 The serial number label is located as follows: • Brocade 200E-On the nonport side of the chassis • Brocade 300, 4100, 4900, 5100, 5300, and 7500-On the switch ID pull-out tab located inside the chassis on the port side on the left • Brocade 5000-On the switch ID pull-out tab - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 52
lii Fabric OS Message Reference 53-1000640-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 53
guide supports Fabric OS v6.1.0 and documents system messages that can help you diagnose and fix problems with a switch or fabric. The messages are organized first by event type, reliability, availability, and serviceability 3 •Port Logs 4 System Error Message Logging The RASLog service generates - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 54
number can be reset to 1 using the errClear command. The sequence number is persistent across power cycles and switch support post-event audits and problem determination based on high-frequency events of certain types such as security violations, zoning configuration changes, firmware downloads user- - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 55
/logout, passwords, ACLs): SEC-3001 - 3038 • Software upgrade library: SULB configuration, firmware, and logging on the Brocade 24000 and 48000 Guide. System Console The system console displays messages only through the serial port. If you log in to a switch through the Ethernet port or modem port - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 56
Port logs capture switch-to-device, device-to-switch, switch-to-switch, some device A-to-device B, and control information. Port port logs for a particular port. Run the portLogEventShow command to display the specific events reported for each port. Refer to the Fabric OS Administrator's Guide Brocade - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 57
the debug pdisc_flag. portLogReset Enables the port log facility. portLogResize Resizes the port log to the specified number of entries. portLogShow Displays the port log, with page breaks. portLogShowPort Displays the port log of specified port, with page breaks. portLogTypeDisable Disables - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 58
commands. This output is used by your switch service provider to diagnose and correct problems with the switch. The output from this command is very seen to slot 0 is a reference to the blade within the switch platform, e.g.,Brocade 7500 and AP7600 contain FR4-18i and FA4-18 blades respectively. - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 59
17:04:51, [EM-1055], 3,, WARNING, switch, Media 27: Port media incompatible. Reason: Configured port speed. 2004/07/28-17:04:54, [FABR-1001], 4,, WARNING, switch, port 4, ELP rejected by the other switch 2004/07/28-17:05:06, [FW-1050], 5,, WARNING, switch, Sfp Supply Voltage 0, is below low boundary - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 60
Description Example Variable Name Description 2004/07/22-10:12:33 Date and Time Stamp [EM-1031] Message Module and Message Number The system time (UTC) when the message was generated on the switch. The RASLog subsystem supports an internationalized timestamp format base on the "LOCAL" setting - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 61
The sequence number can be reset to 1 using the errClear command. The sequence number is persistent across power cycles and switch reboots. For flagged as AUDIT provide additional user and system-related information of interest for post event auditing and problem determination. Audit event message - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 62
switch. The RASLog subsystem will support an internationalized timestamp format base on the "LOCAL" setting. Message Module and Message Number The message module and number in this manual. Note that not all message numbers are used; Firmware Fabric User ID The user ID. Role The role of the user - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 63
, detecting online and offline status of a fabric port. Responding to a System Message This section provides procedures on gathering information on system messages, including: •Looking Up a System Message 11 •Gathering Information About the Problem 12 •Support 12 •Panic Dump and Core Dump Files - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 64
port (console) logs available? 12. Which CP was master? (only applicable to the Brocade DCX, 12000, 24000, or 48000) 13. What and when were the last actions or changes made to the system? Support Fabric OS creates a number of files that can help support personnel troubleshoot and diagnose a problem - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 65
provide to support when requested ports. Access Gateway mode transforms the Brocade 200E as well as embedded switches into a device management tool that is compatible with different types of fabrics, including Brocade-, Cisco-, and McDATA-based fabrics. Authentication error messages indicate problems - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 66
driver module. Firmware blade compatibility errors with control processor (CP). Fibre Channel over IP port configuration messages. Fibre Channel miscellaneous messages relate to problems with the physical layer used to send Fibre Channel traffic to and from the switch. The Fibre Channel Protocol - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 67
. Moreover, ICPD distributes iSCSI configurations not only switch wide, but also fabric wide. It keeps track iSCSI VT status and updates VT status to BP. System messages generated by the IP admin demon. Fibre Channel over IP license, tunneling, and port-related messages. The ISCS module is the FabOS - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 68
• EVM daemon (evmd) • Exchange Service Support daemon (essd) • FA-API rpc daemon part of the FSPF protocol that maintains records on the status of port links. This database is used to route frames. MS-FICON messages relate to Fibre Connection (FICON) installations. Fibre Connection control unit port - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 69
TABLE 5 System Module MS NBFS NS PDM PDTR PLAT PORT PS PSWP RAS RCS RPCD RTWR SAS SCN SEC System Module Descriptions (Continued) Description The Management Service enables the user to obtain information about the Fibre Channel fabric topology and attributes by providing a single management access - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 70
informational only and are generated even during successful firmware download. For additional information, refer to the Fabric OS Administrator's Guide. These messages are generated by the switch driver module that manages a Fibre Channel switch instance. System controller is a daemon that starts up - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 71
RASLog Messages Section I This section provides the RASLog messages, including: •AG System Messages 23 •AUTH System Messages 31 •BKSW System Messages 45 •BL System Messages 47 •BLL System Messages 61 •BM System Messages 63 •C2 System Messages 69 •CDR System Messages 71 •CER System Messages - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 72
Messages 321 •NBFS System Messages 327 •NS System Messages 329 •PDM System Messages 331 •PDTR System Messages 339 •PLAT System Messages 341 •PORT System Messages 343 •PS System Messages 345 •PSWP System Messages 347 •RAS System Messages 349 •RCS System Messages 353 •RPCD System Messages - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 73
DRAFT: BROCADE CONFIDENTIAL •TRCK System Messages 451 •TS System Messages 453 •UCST System Messages 457 •UPTH System Messages 459 •WEBD System Messages 461 •ZOLB System Messages 463 •ZONE System Messages 465 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 74
- HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 75
. • Some blades and ports in a switch may not support NPIV. NPIV functionality cannot be enabled on such ports and they will not respond to NPIV requests. Refer to the Access Gateway Administrator Guide, Appendix B for specific AG compatibility requirements. • On non-Brocade switches, refer to the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 76
FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AG-1005 Message , [AG-1005], ,, WARNING, , FDISC response was dropped because F_Port is offline. Probable Cause Indicates that the F_Port - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 77
FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1009 Message , [AG-1009], ,, WARNING, , Sending FLOGI failed on N_Port . Probable Cause Failure sending Fabric Login (FLOGI) request from - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 78
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1013 Message , [AG-1013], ,, INFO, , F_Ports mapped to N_Port failed over to other N_Port(s). Probable Cause Indicates that the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 79
transfers; then run the supportsave command and contact your switch service provider. Severity WARNING AG-1016 Message , [AG-1016], ,, INFO, , Failing over F_Ports mapped to N_Port to other N_Port(s). Probable Cause Indicates that the specified - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 80
ERROR AG-1019 Message , [AG-1019], ,, WARNING, , Unable to failover N_Port . No other N Port in port group: is online. Probable Cause Failover across port groups is not supported. Recommended Please check whether or not an alternate N_Port is - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 81
mapping. Action Severity INFO AG-1025 Message , [AG-1025], ,, ERROR, , Port group of Slave N_Port is different than its Master N_Port . Probable Cause Indicates that port group of Master and Slave N_Ports are different while the Trunk Area - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 82
1027], ,, WARNING, , Unable to handle this login request on port because NPIV capability is not enabled on this port. Probable Cause NPIV not enabled. Recommended Run portcfgnpivport CLI on AG switch and enable the NPIV capability on this port. Action Severity - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 83
needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1003 Message , [AUTH-1003], ,, INFO, , type has been successfully set to . Probable Cause - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 84
command and contact your switch service provider. Severity WARNING AUTH-1007 Message Probable Cause , [AUTH-1007], ,, ERROR, , The proposed authentication protocol(s) are not supported: port . Indicates that the proposed authentication - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 85
switch supports the specified protocols: Fibre channel authentication protocol (FCAP) or Diffie Hellman - challenge handshake authentication protocol (DH-CHAP). Severity ERROR AUTH-1008 Message , [AUTH-1008], ,, ERROR, , No security license, operation - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 86
supportSave command and contact your switch service provider. Severity WARNING AUTH-1014 Message , [AUTH-1014], , FFDC, ERROR, , Invalid port value to : port . Probable Cause Indicates an internal problem with the Secure Fabric OS - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 87
the supportSave command and contact your switch service provider. Severity ERROR AUTH-1018 Message , [AUTH-1018], ,, ERROR, , Invalid value to check protocol type: port . Probable Cause Indicates an internal problem with the Secure Fabric OS - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 88
run the supportSave command and contact your switch service provider. Severity INFO AUTH-1022 Message , [AUTH-1022], ,, ERROR, , Failed to extract from payload: port . Probable Cause Indicates that the authentication - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 89
supportSave command and contact your switch service provider. Severity ERROR AUTH-1026 Message , [AUTH-1026], ,, WARNING, , Failed to get during negotiation phase: port . Probable Cause Indicates that the authentication - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 90
phase failed. Recommended Action Usually this problem is transient. The authentication might fail. switch service provider. Severity ERROR AUTH-1030 Message , [AUTH-1030], ,, ERROR, , Invalid message code for message: port - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 91
replay attacks. Recommended Action Usually this problem is transient. The authentication might fail. switch service provider. Severity ERROR AUTH-1033 Message , [AUTH-1033], ,, ERROR, , Disable port due to unauthorized switch - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 92
, Invalid state for : port . Probable Cause Indicates that the switch received an unexpected authentication message. Recommended Action Usually this problem is transient. The authentication might fail. Reinitialize authentication using - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 93
supportSave command and contact your switch service provider. Severity ERROR AUTH-1039 Message Probable Cause , [AUTH-1039], ,, ERROR, , Neighboring switch has conflicting authentication policy: Port disabled. Indicates that the neighboring - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 94
FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1042 Message Probable Cause , [AUTH-1042], ,, ERROR, , Port has been disabled, because authentication failed with code ' - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 95
port . Probable Cause Indicates authentication has timed out after multiple retries. The specified port has been disabled as a result. This problem may be transient due to the system's central processing unit (CPU) load. In addition, a defective small form-factor pluggable (SFP - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 96
3 AUTH-1044 44 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 97
on dual-CP switches). The warning message might be any one of the following: • Probable Cause: One of the critical daemons ended unexpectedly. • Probable Cause: One - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 98
4 BKSW-1003 46 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 99
sequence-number>,, INFO, , Initializing ports... Probable Cause Indicates that the switch has started initializing the ports. Recommended have hardware problems. Note that any reference seen to slot 0 is a reference to the blade within the switch platform, e.g.,Brocade 7500 and AP7600 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 100
>, FFDC, CRITICAL, , Suppressing blade fault in slot . Probable Cause Indicates that the specified blade experienced a failure but was not faulted due to a user setting. Recommended Action Reboot or power cycle the blade, using the slotPowerOff and slotPowerOn commands - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 101
user intervention, no action is required. Severity INFO BL-1007 Message , [BL-1007], ,, WARNING, , blade # - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 102
sequence-number>, FFDC, CRITICAL, , Busy with emb-port int. for chip in minis on blade , (SFP), or device attached to the specified port. Run the systemVerification command to verify that the blade or switch does not have hardware problems. Run - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 103
is the blade port; this number might not correspond to a user port number. Recommended Action Make sure to capture the console output during this process. Check for a faulty cable, small form-factor pluggable (SFP), or device attached to the specified port. On a bladed switch, run the slotPowerOff - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 104
or slotPowerOn fails on the bladed switch or if errors are encountered again: • On the Brocade DCX, 24000, and 48000, replace the blade switch operation. The port is disabled to prevent the CP from becoming too busy. The bport is the blade port; this number might not correspond to a user port number - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 105
. Run the systemVerification command to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) -number>,, INFO, , Slot , retry , internal port retry initialization, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 106
the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Run number>,, CRITICAL, , Init Failed: Switch DISABLED because internal ports were not ONLINE, . Probable Cause Indicates that the switch - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 107
/FCIP Virtualization ports on the blade in slot will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the blade's firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all GigE/Fibre Channel over IP - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 108
], ,, INFO, , All ports on the switch will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the switch's internal processor firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 109
/FC Fastwrite ports on the switch will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the switch's internal processor firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all the GigE/Fibre Channel over IP - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 110
slot has completed initializing Fibre Channel (FC) ports. Recommended No action is required. Action Severity INFO BL-1035 Message , [BL-1035], ,, INFO, , Slot iSCSI port Initialization completed. Probable Cause - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 111
BL-1037 Message , [BL-1037], ,, CRITICAL, , Faulting chip in slot = , miniS = ,port = due to BE/BI port fault. Probable Cause Fault the chip and disable all the ports on that chip. Recommended No action is required - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 112
5 BL-1037 60 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 113
Message , [BLL-1000], , FFDC, CRITICAL, , ASIC driver detected Slot port as faulty (reason: ) Probable Cause Indicates that a blade regulation problem was reported on the specified slot number. The blade is faulted. The - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 114
6 BLL-1000 If the message persists, replace the blade. Severity CRITICAL 62 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 115
download is supported between the versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware on the AP blade. If needed, send the AP blade back to the factory for a firmware update. Severity ERROR BM-1002 Message , [BM-1002], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 116
blade. On the Brocade Action DCX, 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1006 Message , [BM-1006], ,, INFO, , Blade is not configured. Persistently disabling all ports for blade in slot - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 117
affected blade. On the Brocade Action 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1010 Message , [BM-1010], ,, INFO, , Resetting port configuration and linkcost for all ports for blade in slot - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 118
. On the Brocade Action DCX, 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1056 Message , [BM-1056], ,, INFO, , AP is not configured. Persistently disabling all ports on the switch. 66 Fabric - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 119
persistently enable all ports. Action Severity INFO BM-1058 Message , [BM-1058], ,, WARNING, , Download of AP firmware failed for the switch. Reissue firmwaredownload to recover. Probable Cause The automatic firmware upgrade on the application processor - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 120
7 BM-1058 68 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 121
are using compatible SFPs on the peer ports. Verify that the SFPs have not Action deteriorated and the Fibre Channel cable is not faulty. Replace SFPs or cable if necessary. Severity ERROR C2-1002 Message , [C2-1002], ,, ERROR, , Port chip - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 122
not effective on S() user port because QoS license is not present. Probable Cause Indicates that the switch does not have the QoS license added. Rate Limit is a licensed feature and requires QoS license. Recommended Add QoS license to the switch to enable the Rate Limit - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 123
Fibre Channel cable is not faulty. Replace the SFPs or cable if necessary. If there is a speed configuration mismatch, replace the SFP with a compatible one or change the configuration. Severity ERROR CDR-1002 Message , [CDR-1002], , FFDC, ERROR, , Port - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 124
>, [CDR-1004], , FFDC, ERROR, , , : invalid DMA ch pointer, chan:, good_addr:0x, the system at the next maintenance window. If the problem Action persists, replace the blade. Severity ERROR 72 Fabric OS Message Reference - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 125
loaded on the standby CP. The standby CP does not support the Advanced Performance Tuning module when the fibre connectivity (FICON) Management Server is enabled. Recommended Action Run the firmwareDownload command to upgrade the firmware on the standby CP. You can also disable FMS on the active - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 126
10 CER-1001 74 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 127
successfully. The message string that follows is a description of the class of configuration parameters that were downloaded. If Admin Domain (AD) is enabled, the AD number is specified in the description. Recommended No action is required. Action Severity INFO CONF-1001 Message - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 128
-1022 Message , [CONF-1022], ,, INFO, , Downloading configuration without disabling the switch was unsuccessful. Probable Cause Indicates that an attempt to download the configuration without disabling the switch was unsuccessful because there are one or - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 129
to the console. Recommended Action Verify that the location temperature is within the operational range of the switch. Refer to the hardware reference manual for the environmental temperature range of your switch. Run the fanShow command to verify that all fans are running at normal speeds. If any - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 130
string and an optional number to identify the unit, slot, or port. The Brocade 3250 has one power supply and three fans, and the Brocade 3850 has two power supplies and four fans. Values for the individual fans and power supplies for these switches might display, but these parts cannot be replaced - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 131
that the voltage on a switch has exceeded environmental limits. A reset is sent to the faulty slot or the switch for nonbladed switches. Recommended Action There is most likely a voltage hardware problem on the blade or motherboard of the switch. For the Brocade DCX, 24000 and 48000, replace - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 132
12 Brocade 48000 Hardware Reference Manual for more information about chassisConfig modes and supported blades. Severity CRITICAL EM-1010 Message , [EM-1010], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 133
, [EM-1015], ,, WARNING, , Warm recovery failed (). Probable Cause Indicates that a problem was discovered when performing consistency checks during a warm boot. Recommended Monitor the switch. If the problem persists, a reBoot or power cycle - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 134
12 EM-1016 EM-1016 Message , [EM-1016], ,, WARNING, , Cold recovery failed (). Probable Cause Indicates that a problem was discovered when performing consistency checks during a cold boot. Recommended Action Monitor the switch. If the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 135
for internal use only. This is a serious hardware problem. The FRU ID value is composed of a FRU type string and an optional number to identify the unit, slot, or port. Recommended Action If the message persists, reboot or power cycle the switch. If the message still persists, replace the WWN card - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 136
port blade) if the field-replaceable unit (FRU) is intended for use. Refer to the appropriate hardware manual for instructions on inserting the switch blades. Severity ERROR EM-1033 Message , [EM-1033], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 137
command to verify that the switch does not have hardware problems. Refer to the Fabric OS Command Reference for more information on this command. If the message persists, replace the FRU. Severity WARNING EM-1037 Message , [EM-1037], ,, INFO, , - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 138
12 EM-1041 EM-1041 Message , [EM-1041], ,, WARNING, , Sensor values for : - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 139
must be replaced. For the Brocade 24000, the blade ID should be 5 for a control processor (CP) blade and 4 for a port blade. Severity WARNING EM-1047 Message Probable Cause , [EM-1047], ,, INFO, , CP in slot not faulty, CP ERROR deasserted - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 140
12 EM-1048 Recommended No action is required. Action Severity INFO EM-1048 Message , [EM-1048], ,, INFO, , I2C access recovered: state Probable Cause Indicates that the I2C bus problems have been resolved and I2C access to the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 141
for only the Brocade 4100, 4900, 5000, 7500, and AP7600. Recommended Replace the defective small form-factor pluggable (SFP). Action Severity WARNING EM-1057 Message Probable Cause , [EM-1057], ,, WARNING, , Blade: is getting reset: - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 142
is compatible with your switch type. Action Severity CRITICAL EM-1060 Message , [EM-1060], ,, WARNING is not supported by the release on the standby control processor (CP). Recommended Action Please remove all blades of this type or upgrade your standby CP - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 143
12 EM-1061 EM-1061 Message , [EM-1061], ,, WARNING, , Synchronization halted. Remove all blades of type or upgrade your standby CP, then reboot or run haSyncStart. Probable Cause A blade in the system is not supported by the release on the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 144
Fabric OS or Storage Application Services (SAS) firmware have been upgraded and are now compatible. Recommended No action is required. Action Severity INFO EM-2003 Message , [EM-2003], ,, ERROR, , has failed - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 145
12 EM-2003 • Run the systemverification command to verify that the switch does not have hardware problems. Refer to theFabric OS Reference Manual for more information on this command. • On bladed systems, replace the specified FRU, otherwise replace the switch. Severity ERROR Fabric OS Message - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 146
12 EM-2003 94 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 147
Action Discontinue the firmware download, identify the downlevel switch or switches that do not support the Coordinated HotCode protocol, and upgrade the downlevel switches. Then, restart the firmware download on this switch. Note that upgrading a downlevel Brocade switch in a mixed interop - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 148
. Probable Cause During the Coordinated HotCode protocol, a switch in the fabric has rejected the resume message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to the rejected resume message. Recommended - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 149
-1001 Message , [EVMD-1001], ,, WARNING, , Event could not be sent to remote proxy. = Probable Cause The event could not be sent to the remote proxy because the remote proxy switch cannot be reached through in-band. Recommended - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 150
14 EVMD-1001 98 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 151
FABR-1003], ,, WARNING, , port : ILS bad size , wanted . Probable Cause Indicates that an internal link service (ILS) information unit of invalid size has been received. The neighbor switch has sent an invalid - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 152
switch service provider. Severity WARNING FABR-1004 Message , [FABR-1004], ,, WARNING, , port: - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 153
and contact your switch service provider. Severity WARNING FABR-1007 Message , [FABR-1007], ,, WARNING, < message occurs with FABR-1005, the problem is usually transitory. Otherwise, this message is rare and usually indicates a problem with the Fabric OS. The error - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 154
a problem with the Fabric OS. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING FABR-1011 Message , [FABR-1011], , FFDC - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 155
up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL FABR-1014 Message , [FABR-1014], , FFDC, ERROR, , Port Disabled: Insistent Domain ID could not be obtained - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 156
,, WARNING, , ficonMode is enabled. Probable Cause Indicates that FICON mode is enabled on the switch through a user interface , FFDC, CRITICAL, , Critical fabric size () exceeds supported configuration ( - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 157
to within the licensed limit. Contact your switch provider to obtain a full fabric license. Severity CRITICAL FABR-1022 Message , [FABR-1022], , FFDC, CRITICAL, , Fabric size () exceeds supported configuration (). Fabric - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 158
fabric must be changed to within the licensed limit. Contact your switch provider to obtain a full fabric license. Severity INFO FABR-1029 Message Probable Cause , [FABR-1029], ,, INFO, , Port negotiated (mode - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 159
This is the Fibre Channel standard protocol, that uses R_RDY primitive for flow control. • DUAL_CR mode: Dual-credit flow control mode. In both of the previous modes, the buffer credits are fixed, based on the port configuration information. In this mode, the buffer credits are negotiated as part of - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 160
is not in use, or the user must disable Trunk Area. The user has to manually enable the port else the port remains disabled forever. Refer to the Admin Guide for more information. Severity INFO FABR-1035 Message , [FABR-1035], , INFO, , Slave area - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 161
trunking is enabled. Recommended Install trunking license or disable F port trunking over the port. Action Severity INFO FABR-1039 Message , [FABR-1039], , WARNING, , Invalid domain id zero received from principal switch (domain id= - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 162
15 FABR-1039 110 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 163
cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1004 Message , [FABS-1004], ,, WARNING, , process ( - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 164
systems) or the switch (for single-board systems). If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1006 Message , [FABS-1006], ,, WARNING, , : object - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 165
internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1011 Message Probable Cause , [FABS-1011], ,, ERROR, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 166
usually an internal Fabric OS problem. Recommended Action Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware. Severity ERROR FABS-1013 Message , [FABS-1013], ,, ERROR, , - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 167
>]:Request to enable FRU type 0x, unit failed. err code Probable Cause Indicates the specified FRU could not be enabled. This is usually an internal Fabric OS problem. Recommended Action Try removing and reinserting the FRU. Reboot or power-cycle the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 168
16 FABS-1015 116 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 169
Cause The CP determined that the version of firmware running on the AP blade is not compatible with the version of firmware running on the CP. The AP and CP blades cannot communicate. Recommended Action The problem can be corrected by changing the version of firmware on the CP or AP blades. The - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 170
17 FBC-1001 118 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 171
, [FCIP-1000], , FFDC, ERROR, , of GE failed. Please retry the command. Data type> slot=. Probable Cause Indicates that the FIPS failure has occured and requires faulting the blade/switch. Recommended Retry the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 172
18 FCIP-1001 120 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 173
Chapter FCMC System Messages 19 FCMC-1001 Message , [FCMC-1001], , FFDC, CRITICAL, , System is low on memory and has failed to allocate new memory. Probable Cause Indicates that the switch is low on memory and failed to allocate new memory for an - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 174
19 FCMC-1001 122 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 175
System Messages 20 FCPD-1001 Message , [FCPD-1001], ,, WARNING, , Probing failed on . Probable Cause Indicates that a fibre channel protocol (FCP) switch probed devices on a loop port, and the probing failed on the either the L_Port, AL_PA - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 176
20 FCPD-1003 124 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 177
, [FCPH-1001], , FFDC, CRITICAL, , : failed, out of memory condition Probable Cause Indicates that the switch is low on memory and failed to allocate new memory for a Fibre Channel driver instance. The function can only be - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 178
21 FCPH-1001 126 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 179
No action is required. Action Severity INFO FCR-1002 Message , [FCR-1002], ,, INFO, , FC router proxy device in edge deleted at port . Probable Cause Indicates that a proxy device in the edge fabric has been deleted at the specified - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 180
, or dirty connections. Replace the cables and SFPs if necessary. Severity INFO FCR-1005 Message , [FCR-1005], ,, INFO, , FC router LSAN zone device removed at port . Probable Cause Indicates that a device is removed from the logical storage - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 181
. Recommended No action is required. Action Severity INFO FCR-1009 Message , [FCR-1009], ,, INFO, , FC router LSAN zone enabled at port : . Probable Cause Indicates that a logical storage area network (LSAN) zone was enabled in - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 182
INFO, , FC Router fabric build completed on port . Probable Cause Indicates that the fibre channel router has completed a fabric build at the specified port. Recommended No action is required. Action Severity INFO FCR-1013 Message , [FCR-1013], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 183
how many proxy devices are created in the fabric with the port resource problem. LSAN zones are removed using standard zoning commands such as ], ,, ERROR, , EX or VEX port entries exhausted at port . Probable Cause Indicates that the number of EX_Port - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 184
timestamp>, [FCR-1023], ,, WARNING, , Local phantom port WWN entries exhausted. Probable Cause Indicates that the number of port world-wide names (WWNs) in use exceeds the local port WWN resources. Recommended Action Limit the number of port WWNs required by limiting - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 185
a result of pool rollover unless the switch is deployed in a very large MetaSAN environment with large number of logical storage area network (LSAN) Message , [FCR-1027], ,, INFO, , In slot port WWN roll over. Fabric OS Message Reference - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 186
a result of pool rollover unless the switch is deployed in a very large MetaSAN environment with large number of logical storage area network (LSAN ], ,, INFO, , In slot port WWN pool 95 percent allocated. Probable Cause Indicates that the Port world-wide - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 187
fabric. Recommended No action is required. Action Severity INFO FCR-1033 Message , [FCR-1033], ,, INFO, , Edge fabric disabled security on port in fabric . Probable Cause Indicates that Secure mode was turned off in the edge - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 188
(LSAN) zone in the backbone fabric. Recommended No action is required. Action Severity INFO FCR-1036 Message , [FCR-1036], ,, INFO, , LSAN zone enabled in the backbone fabric. Probable Cause Indicates that the specified logical storage area - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 189
of cfg/zone/alias entries created in a local fabric is greater than the local switch's zone database limitations. Recommended Remove excess cfg/zone/alias entries so that the number of logical storage area network (LSAN) Action zones created is within the range of the local database limitations - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 190
the supportShow command, and contact your switch service provider. Severity ERROR FCR-1049 Message Probable Cause , [FCR-1049], ,, ERROR, , EX port () received an ELP command that is not supported. Indicates an incoming exchange link protocol - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 191
and portDisable commands to enable and disable the port. If the problem persists contact your switch service provider. Severity ERROR FCR-1053 Message , [FCR-1053], ,, WARNING, , Port was disabled, . Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 192
edge routing is not needed. Otherwise replace the switch with Action one that supports backbone to edge routing. Severity INFO FCR-1057 Message , [FCR-1057], ,, ERROR, , EX_Port() incompatible long distance parameters on link. Probable Cause - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 193
flow control mode. This is the Fibre Channel standard protocol, that uses R_RDY primitive for flow control. Severity WARNING FCR-1061 Message , [FCR-1061], ,, INFO, , Backbone fabric created on port . Probable Cause Indicates that a backbone - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 194
command. Severity ERROR FCR-1065 Message , [FCR-1065], ,, ERROR, , Fabric on port was assigned two different fabric IDs. Probable Cause Indicates that another port on the switch is connected to the same edge fabric with a different fabric - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 195
zones and aliases, exceeded on port by entries; max entries: . Probable Cause Indicates that the total number of zone configurations created in the connected fabric exceeds the maximum number supported by the Fibre Channel. The limit includes both active - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 196
to default by user. This removes all prior FC Routing configurations. Recommended No action is required. Action Severity INFO FCR-1071 Message , [FCR-1071], ,, INFO, , Port is changed from non FCR port to FCR port. Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 197
a switch in the backbone/edge that supports different limit of logical storage area network (LSAN) zones was detected. Recommended Action Use the fcrResourceShow command on all Fibre Channel Routers in the Meta-SAN to find the lowest supported LSAN zone limits. Please make sure that total number - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 198
to remain within the maximum of supported front domains. Action Severity ERROR FCR-1077 Message , [FCR-1077], ,, WARNING, , Port rejected fabric binding request/check from the M-Model switch; . Probable Cause Indicates that an - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 199
protocol from completing. Any data traffic disruption observed during the firmware download may have been due to the rejected pause message. Recommended Action Severity WARNING FCR-1081 Message , [FCR-1081], ,, WARNING, , The pause message is rejected by - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 200
the domain . Probable Cause During the Coordinated HotCode protocol, a switch in the fabric did not accept the resume message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to this issue. Recommended Action - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 201
where: VE - VE Port Number: This number represents the FCIP Tunnel number through its VE Port number. HD - Host switch Domain number: This is a 1 byte hexidecimal value that represents the domain of the switch that the FICON Channel is directly connected to. HP - Host Port number: This is a 1 byte - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 202
Emulation states>. Probable Cause Selective Reset from the channel received as either a normal part of path recovery or starting sequence in an error case. Recommended If there was a job failure associated with this event, please contact your vendor's customer support. Action Severity ERROR 150 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 203
Path received from the channel as a part of path recovery. Recommended If there was a job failure associated with this event, please contact your vendor's customer support Action for assistance. Severity ERROR FICN-1009 Message , [FICN-1009], ,, INFO, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 204
there was a job or IO failure associated with this event, please contact your vendor's customer Action support for assistance. Severity ERROR FICN-1013 Message , [FICN-1013], ,, INFO, , DevDiskIng:Status=0x - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 205
customer support for assistance. Action Severity ERROR FICN-1016 Message , [FICN-1016], ,, INFO channel. Recommended This is an informational message and does not require any action. Action Severity INFO FICN-1018 Message , [FICN-1018], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 206
status control flags for the device>. Probable Cause The FICON channel issued a Cancel sequence for a device in emulation. Recommended support for assistance. Severity ERROR FICN-1022 Message , [FICN-1022], ,, ERROR, , DevTapeEgr:FICON Selective Reset - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 207
FICON channel issued a Selective Reset sequence for a device. Recommended If there was an unexpected job failure associated with this event, please contact your vendor's Action customer support for assistance. Severity ERROR FICN-1024 Message , [FICN-1024], ,, ERROR - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 208
with this event, please contact your Action vendor's customer support for assistance. Severity ERROR FICN-1029 Message Probable Cause , [FICN-1029], ,, ERROR, , HostDiskIng:FICON Selective Reset:Path= state=0x - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 209
your Action vendor's customer support for assistance. Severity ERROR FICN-1031 Message , [FICN-1031], ,, WARNING, , HostDiskIng:FICON System Reset received on Path=. Probable Cause The FICON channel sent a System Reset to the disk control - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 210
your vendor's customer support for assistance. Action Severity ERROR FICN-1035 Message , [FICN-1035], ,, WARNING, , HostIng:FICON System Reset received on Path=. Probable Cause A locally connected FICON channel issued a System Reset to the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 211
Cause A locally connected FICON channel sent a frame that could not be associated with a FICON device. Recommended Please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1039 Message , [FICN-1039], ,, ERROR, , HostIng - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 212
normally an operator event), please contact your Action vendor's customer support for assistance. Severity WARNING FICN-1043 Message , [FICN-1043], ,, ERROR, , HostTapeIng::FICON Selective Reset:Path= state=0x - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 213
locally connected FICON channel. This is performed during the path recovery. Recommended If this was an unexpected event, please contact your vendor's customer support for assistance. Action Severity WARNING FICN-1046 Message , [FICN-1046], ,, WARNING, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 214
data from the locally connected channel or control unit>. Probable Cause A TIR received from a FICON end point indicates that it no longer has an established path to its peer. Recommended This is an unexpected event, please contact your vendor's customer support for assistance. Action Severity - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 215
This is a part of the XRC session establishment. Action Severity INFO FICN-1052 Message , [FICN-1052], ,, INFO, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 216
DASD device. Recommended If this was an unexpected event, please contact your vendor's customer support for assistance. Action Severity WARNING FICN-1056 Message , [FICN-1056], ,, ERROR, , FICON Emulation Error Error Code= - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 217
path hash table entry. Recommended This is an unexpected event, please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1062 Message , [FICN-1062], ,, ERROR, , Ingress Abort:Oxid=0x:Path - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 218
vendor's Action customer support for assistance. Severity INFO FICN-1065 Message , [FICN-1065], ,, INFO, , Egress Abort:Oxid=0x:Unknown Path on GEPort= VEPort= from SID=0x to DID - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 219
are already in use Action or there is an internal memory leak, please contact your vendor's customer support for assistance. Severity WARNING FICN-1067 Message , [FICN-1067], ,, ERROR, , Ingress Abort:Oxid=0x:Abort for CH - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 220
received from an active emulation device. Recommended The end of tape is a normal event during pipelining and support for assistance. Severity INFO FICN-1071 Message , [FICN-1071], :status=0x - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 221
chains processed while this tape was loaded>:MBytes=. Probable Cause A Rewind and Unload IO has been processed from a locally connected LPAR and Read Channel Program pipelining was performed on the currently loaded tape - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 222
Message , [FICN-1077], ,, INFO, , DevTapeEgr:Unloaded:Path=:states=0x:cmds=0x:status=0x:flags=0x - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 223
attached port which had an FICON emulated path established has logged out from the switch. Recommended This may be an unexpected event, please contact your vendor's customer support for assistance. Action Severity WARNING FICN-1083 Message , [FICN-1083], ,, WARNING - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 224
Cause An attached port with the established FICON emulated path has logged out from the switch. Recommended This may be an unexpected event, please contact your vendor's customer support for assistance. Action Severity WARNING FICN-1084 Message , [FICN-1084], ,, ERROR - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 225
node ID (RNID). The error variable is an internal error number. Recommended Action If this is a bladed switch, execute the haFailover command. If the problem persists, or if this is a nonbladed switch, download a new firmware version using the firmwareDownload command. Refer to the Fabric OS - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 226
, [FICU-1006], ,, WARNING, , Control Device Allegiance Reset (Logical Path: 0x:0x) Indicates that the path with the specified PID and channel image ID lost allegiance to a fibre connectivity control unit port (FICON-CUP) device. 174 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 227
supportSave command and contact your switch service provider. Severity WARNING FICU-1008 Message , [FICU-1008], ,, WARNING, , FMS mode has been enabled. Port(s): have been disabled due to port address conflict. Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 228
24 FICU-1010 FICU-1010 Message , [FICU-1010], ,, WARNING, , FMS Mode enable failed due to address conflict with port . Probable Cause Indicates that the fibre connectivity FICON Management Server mode (fmsMode) was not enabled because the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 229
Chapter FKLB System Messages 25 FKLB-1001 Message , [FKLB-1001], ,, WARNING, , exchange overlapped, pid= Probable Cause Indicates that the FC kernel driver has timed out the exchange while the application is still active. When the FC kernel - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 230
25 FKLB-1001 178 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 231
, [FLOD-1001], , FFDC, WARNING, , Unknown LSR type: port , type Probable can support. Recommended Reduce the number of switches in the fabric or reduce the number of redundant ISLs between two Action switches. Severity - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 232
Severity WARNING FLOD-1006 Message , [FLOD-1006], ,, WARNING, , Transmitting invalid domain ID: Probable Cause Indicates that the transmit LSR contained an invalid domain number. Recommended No action is required; the LSR is discarded - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 233
FSPF-1001 Message , [FSPF-1001], ,, ERROR, , Input Port out of range Probable Cause Indicates that the specified input port number is out of range; it does not exist on the switch. Recommended No action is required. Action Severity ERROR - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 234
0 is incompatible in a fabric of Brocade switches. Disconnect the offending switch. Severity ERROR FSPF-1006 Message , [FSPF-1006], ,, ERROR, , FSPF Version not supported, input port = Probable Cause Indicates that the FSPF - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 235
(as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FSS-1002 Message , [FSS-1002], ,, WARNING, , Component () sending too many concurrent HA data update - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 236
(as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR FSS-1005 Message , [FSS-1005], ,, WARNING, , FSS read failure Probable Cause Indicates that the read system call to - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 237
from the active CP within 5 seconds. This usually indicates a problem with the internal Ethernet connection and a disruption of the synchronization process by issuing the haSyncStart command. If the problem persists, contact your switch service provider. Severity CRITICAL Fabric OS Message Reference - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 238
28 FSS-1007 186 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 239
as a result of a user-initiated action (such as problem. If the problem persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FSSM-1004 Message , [FSSM-1004], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 240
disruptive. In a non-bladed system, this message is logged when the firmware upgrade/downgrade was invoked. The new firmware version is not compatible with current running version. This cause a disruptive firmware upgrade/downgrade. Recommended For a dual CP system, run the firmwareDownload command - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 241
of the end-user installation. Typically, low temperatures means that the fans and airflow of a switch are functioning switch. Refer to the hardware reference manual for the environmental temperature range of your switch. Severity WARNING FW-1003 Message , [FW-1003], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 242
that the speed of the fan has changed. Fan problems typically contribute to temperature problems. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Consistently abnormal fan speeds generally indicate that the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 243
view the status of the power supply. If the power supply continues to be a problem, replace the faulty power supply. Severity INFO FW-1010 Message Probable Cause , [FW-1010], ,, WARNING, , , is below low boundary(High=, Low= - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 244
fluctuations in SFP temperature might indicate a deteriorating SFP. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1034 Message , [FW-1034], ,, WARNING - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 245
form-factor pluggable (SFP) has fallen below the low boundary. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity WARNING FW-1035 Message , [FW-1035], ,, WARNING, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 246
working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO 194 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 247
your optical components are clean and function properly. Replace deteriorating cables or Action SFPs. Check for damage from heat or age. Severity WARNING FW-1043 Message , [FW-1043], ,, WARNING, , , is above high boundary(High=, Low - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 248
this message as is appropriate to the particular policy of the Action end-user installation. Frequent messages indicate that you must replace the SFP. Severity INFO FW-1046 Message , [FW-1046], ,, WARNING, , , is below low boundary(High= - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 249
the small form-factor pluggable (SFP) voltage has risen above the high boundary. The supplied current of the SFP transceiver is outside of the the particular policy of the Action end-user installation. Severity INFO FW-1049 Message , [FW-1049], ,, INFO, , - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 250
policy of the Action end-user installation. Severity INFO FW-1113 Message , [FW-1113], ,, INFO, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 251
SFP failures also cause E_Ports to go down. E_Port downs might be caused by transient errors. A low number of E_Port failures means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 252
connected at both ends. Verify that the small form-factor pluggables (SFPs) have not become faulty. An inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting. Severity INFO FW-1118 Message , [FW-1118], ,, INFO, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 253
to assign another domain ID to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1122 Message , [FW-1122], ,, INFO, , , is below - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 254
the number of switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 255
switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user the number of - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 256
ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1129 Message , [FW-1129], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 257
particular policy of the Action end-user installation. Severity INFO FW-1132 Message , [FW-1132], ,, INFO, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 258
changes occur when the SFP is inserted or removed. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1138 Message , [FW-1138], ,, INFO, , - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 259
the SFP is inserted or removed. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1160 Message Probable Cause , [FW-1160], ,, INFO, , - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 260
errors and, if applicable, troubleshoot them. A low number of link loss errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1162 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 261
cable and small form-factor pluggables (SFPs) are not faulty. If you continue to experience synchronization loss errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity INFO FW-1165 Message , [FW-1165], ,, INFO, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 262
and small form-factor pluggables (SFPs) are not faulty. If you continue to experience loss-of-synchronization errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity WARNING FW-1167 Message , [FW-1167], ,, INFO, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 263
of signal generally indicates a physical problem. Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty. Severity INFO FW-1172 Message , [FW-1172], ,, INFO, , , , value has - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 264
occur due to hardware problems. Recommended Check both ends of your connection. Verify that your cable and small form-factor pluggable (SFP) Action are not faulty. Severity WARNING FW-1175 Message , [FW-1175], ,, INFO, , , , is between - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 265
a hardware problem with an small form-factor pluggable (SFP) or cable. A low number of invalid words means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 266
to the particular policy of the Action end-user installation. A low number of invalid CRCs means that the switch is functioning normally. Severity INFO FW-1182 Message Probable Cause , [FW-1182], ,, WARNING, , , , is above high boundary - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 267
the end-user installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check your small form-factor pluggables (SFPs), of the Action end-user installation. Severity INFO FW-1185 Message , [FW-1185], ,, INFO, , , < - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 268
. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1188 Message , [FW-1188], ,, INFO, , , , value has changed(High=, Low=). Current value is - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 269
. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1190 Message , [FW-1190], ,, INFO, , , , is above high boundary(High=, Low=). Current value - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 270
. A low number of port state changes means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1194 Message , [FW-1194], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 271
occur when the number of CRC errors in Fibre Channel frames for specific problem in this area. A low level of invalid CRC errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 272
problems. When an "above" message is received, check for a faulty cable or deteriorated small form-factor pluggable (SFP). Replace the cable or SFP number of end-to-end (EE) cyclic redundancy check (CRC) errors has changed. Invalid CRC messages occur when the number of CRC errors in Fibre Channel - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 273
value is . Probable Cause Indicates that the number of end-to-end (EE) cyclic redundancy check (CRC) errors has risen above the high boundary. Invalid CRC messages occur when the number of CRC errors in Fibre Channel frames for specific source ID (S_ID) and destination ID (D_ID - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 274
that the switch receives has changed. Receive performance messages appear due to the number of word frames that travel from the configured S_ID to the D_ID pair. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 275
the switch transmits has changed. Transmit performance messages appear due to the number of word frames that travel from the configured S_ID to the D_ID pair. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 276
boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch transmits has changed from a value outside of the acceptable range to a value within the acceptable range. Transmit performance - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 277
particular policy of the Action end-user installation. Severity INFO FW-1275 Message , [FW-1275], ,, INFO, , Value> . Probable Cause Indicates that the number of frame types or commands that the port receives has changed from a value outside of the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 278
to switches in the fabric. Recommended No action is required. Action Severity INFO FW-1298 Message , [FW-1298], ,, WARNING sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 279
sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and the switches in the fabric. Recommended No action is required. Action Severity INFO FW-1302 Message , [FW-1302], ,, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 280
to the switches in the fabric. Recommended No action is required. Action Severity INFO FW-1304 Message , [FW-1304], ,, INFO sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 281
to switches in the fabric. Recommended No action is required. Action Severity INFO FW-1308 Message , [FW-1308], ,, INFO sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 282
the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and >). Current value is . Probable Cause Indicates that the number of simple network management protocol read (RSNMP) violations has changed from a - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 283
the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and Current value is . Probable Cause Indicates that the number of simple network management protocol write (WSNMP) violations has changed from - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 284
Indicates that the number of SES violations has changed. SES violations indicate that an small computer system interface (SCSI) Enclosure Services (SES) request has been received from an unauthorized world-wide name (WWN). The SES_POLICY contains a list of WWNs of device ports that are allowed - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 285
SES violations indicate that an small computer system interface (SCSI) Enclosure Services (SES) request has been received from an unauthorized world-wide name (WWN). The SES_POLICY contains a list of WWNs of device ports that are allowed to access the SES Server functionality. Recommended No action - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 286
security-class messages depend on user policies. Consult your security number of serial violations has changed. Serial violations indicate that an unauthorized serial port request has been received. The SERIAL_POLICY contains a list of switch world-wide names (WWNs) for which serial port - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 287
value is . Probable Cause Indicates that the number of serial violations has fallen below the low boundary. Serial violations indicate that an unauthorized serial port request has been received. The SERIAL_POLICY contains a list of switch world-wide names (WWNs) for which serial - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 288
received. The FRONTPANEL_POLICY contains a list of switch world-wide names (WWNs) for which front . Probable Cause Indicates that the number of front panel violations has fallen below the low to security-class messages depend on user policies. Consult your security administrator for - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 289
user policies. Consult your security administrator for response strategies and policies. Severity INFO FW-1333 Message , [FW-1333], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 290
Current value is . Probable Cause Indicates that the number of switch connection control policy (SCC) violations has changed from a value outside determine the device WWN, switch WWN, and switch port. Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 291
, and switch port. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity WARNING FW-1339 Message , [FW-1339], ,, INFO, , , is between high and low boundaries - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 292
for binding device ports (typically host bus adaptor (HBA) ports) to specific switch ports. DCC policies to security-class messages depend on user policies. Consult your security administrator value is . Indicates that the number of login violations has risen above the high boundary. - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 293
FCS downloads a new configuration to other switches in the fabric, the packet is tagged with a timestamp. The receiving switch user policies. Consult your security administrator Action for response strategies and policies. Severity INFO FW-1345 Message , [FW-1345], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 294
the number of invalid timestamps has fallen below the low boundary. Invalid-timestamp violations indicate a packet with an invalid timestamp has been received from the primary world-wide name (WWN). When the primary fabric configuration server (FCS) downloads a new configuration to other switches in - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 295
switch. If verification fails, it rejects the packet. This counter keeps track of the number of packets received with invalid signatures. Recommended Responses to security-class messages depend on user (FCS). When the FCS downloads a new configuration to the other switches in the fabric, the packet - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 296
configuration server (FCS). When the primary FCS downloads a new configuration to the other switches in the fabric, the packet is signed using switch. This counter keeps track of the number of packets received with invalid certificates. Recommended Responses to security-class messages depend on user - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 297
is signed by the Root CA recognized by the receiving switch. This counter keeps track of the number of packets received with invalid certificates. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 298
occur for many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port where authentication fails is segmented. This counter keeps track of the number of authentication failures. Recommended No - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 299
occur for many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port where authentication fails is segmented. This counter keeps track of the number of authentication failures. Recommended No - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 300
Current value is . Probable Cause Indicates that the number of switch link authentication protocol (SLAP) faulty packets has changed from a the number of time service (TS) out-of-sync violations has changed. Recommended Responses to security-class messages depend on user policies. - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 301
Current value is . Probable Cause Indicates that the number of time service (TS) out-of-sync violations has changed from a value switch, it increments this counter and resets the WWN of the primary FCS to all zeroes. Recommended Responses to security-class messages depend on user - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 302
fabric, but it still has the WWN of the last primary FCS switch, it increments this counter and resets the WWN of the primary FCS to all zeroes. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and policies - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 303
boundary. This violation indicates the number of secure switches with different version stamps have been detected. When a switch is in secure mode, it connects only to another switch that is in secure mode and has a compatible security database. A compatible security database means that the version - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 304
boundary. This violation indicates the number of secure switches with different version stamps have been detected. When a switch is in secure mode, it connects only to another switch that is in secure mode and has a compatible security database. A compatible security database means that the version - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 305
on a switch where it is not allowed. Recommended No action is required. Action Severity INFO FW-1378 Message , [FW-1378], ,, WARNING commands on a switch where it is not allowed. Recommended Responses to security-class messages depend on user policies. Consult your - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 306
of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1402 Message , [FW-1402], ,, WARNING - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 307
can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1424 Message , [FW-1424], ,, WARNING, , Switch status changed from - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 308
power supply. Action Severity WARNING FW-1427 Message , [FW-1427], ,, WARNING, , Switch status change contributing factor Power supply: bad. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 309
the switchStatusPolicySet command. Recommended Replace the faulty WWN card. Action Severity WARNING FW-1433 Message , [FW-1433], ,, WARNING, , Switch status change contributing factor CP: CP non-redundant. Fabric OS Message Reference 257 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 310
a Brocade 24000 chassis in dual-domain configuration, and then reset the micro-switch of the active CP before the heartbeat is up, this will cause both CPs to come up in a non-redundant state. Recommended Action Run the firmwareShow command to verify that both CPs have compatible firmware levels - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 311
or deteriorating small form-factor pluggables (SFPs). Action Severity WARNING FW-1437 Message , [FW-1437], ,, WARNING, , Switch status change contributing factor faulty ports: . (Port(s) . Probable Cause Indicates that the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 312
No action is required. Verify that the event was planned. Action Severity INFO FW-1443 Message Probable Cause , [FW-1443], ,, INFO, , state has changed to . Indicates that the state of the specified field-replaceable unit (FRU - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 313
for full (2X) redundancy, but the user has previously overridden the Switch Status Policy values pertaining to number of power supplies. So those values will not be automatically changed. The default values with no AP blades are: 3 out of service indicates switch status is DOWN, 0 indicates no - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 314
Severity WARNING FW-1501 Message , [FW-1501], ,, INFO, , Mail overflow cleared - hardware problems. Recommended Check for concurrent loss of synchronization errors. Check the SFP and the cable. Then enable the Action port using the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 315
HAM-1004 Message Probable Cause , [HAM-1004], ,, INFO, , Processor rebooted - . This message records switch processor reboot reasons that were initiated by the user or the switch errors. The switch processor reboots can be initiated by the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 316
the EMAC controller and will wait for the standby CP to reset it if it is down. Recommended No action is required. Action Severity INFO HAM-1006 Message Probable Cause , [HAM-1006], ,, CRITICAL, ,EMAC controller for Active CP is BAD. Indicates - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 317
31 HAM-1006 Recommended The standby CP will take over and reset the active CP.The system will be non-redundant as the Action standby becomes the active CP. Severity CRITICAL Fabric OS Message Reference 265 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 318
31 HAM-1006 266 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 319
automatically and attempts a cold recovery. RUn supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL HAMK-1002 Message , [HAMK-1002], ,, INFO, , Heartbeat - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 320
32 HAMK-1004 HAMK-1004 Message ,[HAMK-1004], ,, INFO, , Resetting standby CP (double reset may occur). Probable Cause Indicates that the standby control processor (CP) is being reset due to a loss of heartbeat. This message is typically seen when the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 321
switch (for nonbladed switches). Action Severity ERROR HIL-1103 Message , [HIL-1103], ,, ERROR, , Blower - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 322
the motherboard FRU. For the Brocade 4100, 4900, 5000, 7500, and AP7600, if the 12 volt level is faulty, replace one or both power supplies; if any other voltage is faulty, replace the entire switch. Severity ERROR HIL-1106 Message , [HIL-1106], ,, ERROR, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 323
-number>, FFDC, CRITICAL, , Switch faulted, () below threshold. System preparing for reset. Probable Cause Indicates that the switch voltage is below threshold. This message is specific to nonbladed switches and is not applicable to the Brocade - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 324
-name>, Fan faulted, speed ( RPM) below threshold. Probable Cause Indicates that the specified fan speed (in RPM) has fallen below the minimum threshold. This message is specific to nonbladed switches and is not applicable to the Brocade 24000, or 48000. Recommended - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 325
number> , speed ( RPM) below threshold. Probable Cause Indicates that the specified fan speed (in RPM) has fallen below the minimum threshold. This problem can quickly cause the switch to overheat. This message is specific to nonbladed switches and is not applicable to the Brocade - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 326
message is often preceded by a low speed error message. This problem can cause the switch to overheat. Recommended Replace the affected fan FRU immediately. Action Severity ERROR HIL-1304 Message , [HIL-1304], ,, ERROR, , Two fans failed. Replace failed - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 327
low fan speed message. Recommended Replace the faulty fan FRUs immediately. Action Severity ERROR HIL-1307 Message , [HIL-1307], ,, ERROR, , Four or five fans failed. Replace failed fan FRUs immediately. Probable Cause Indicates that multiple fan field - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 328
the fans are not field replaceable, replace the switch if the temperature is high. Action Severity WARNING HIL-1311 Message , [HIL-1311], ,, INFO, , No fans are faulty. Probable Cause Indicates recovery from earlier condition of one or more fans having - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 329
(FRU) has been removed. Recommended Install the missing fan FRU. Action Severity WARNING HIL-1402 Message , [HIL-1402], ,, WARNING, , Two fan FRUs missing. Install fan FRUs immediately. Probable Cause Indicates that two fan field-replaceable units (FRUs - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 330
. Refer to the hardware reference manual for your switch for the operational temperature range. Severity WARNING HIL-1502 Message , [HIL-1502], , FFDC, CRITICAL, , Slot , high temperature (). Unit will be shut down in - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 331
switch. Refer to the hardware reference manual for your switch for the operational temperature range. Severity CRITICAL HIL-1507 Message , [HIL-1507], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 332
switch. Refer to the hardware reference manual for your switch for the operational temperature range. Severity CRITICAL HIL-1509 Message , [HIL-1509], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 333
. If any sensor is too high, monitor the switch. Try rebooting or power cycling the switch. Severity CRITICAL HIL-1603 Message , [HIL-1603], , FFDC, CRITICAL, , fans out of service. System is shutting down immediately. Probable Cause - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 334
33 HIL-1650 Severity ERROR 282 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 335
-name>, Invalid Hello received from port , Domain = , Remote Port =. Indicates that the HLO message received was invalid and the frame was dropped. The Brocade switch will not accept FSPF frames from the remote switch. Fabric OS Message Reference 283 53 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 336
invalid HLO because either the domain or port number in the HLO message has an invalid value. This error can only occur when the Brocade switch is connected to a switch from another manufacturer. Recommended The HLO message of the remote switch must be compatible with the value specified in the FSPF - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 337
-number>, FFDC, CRITICAL, , Probable Cause Indicates that there was a problem reading firmware to your switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 338
35 HMON-1001 286 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 339
, [HTTP-1001], ,, INFO, , Switch PIDformat has changed to - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 340
36 HTTP-1003 288 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 341
to restart failed. Disabling port. Probable Cause Indicates that the specified port has crashed unexpectedly and restarting attempts have failed. Recommended Power off and power on the blade using the slotPowerOff and slotPowerOn commands. On the Action Brocade 7500 or 7600, switch off and on all - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 342
37 IBD-1001 290 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 343
-name>, iSCSI login sessions exceed the maximum limit at slot port ge Probable Cause Indicates that the iSCSI login sessions exceed the supported limit per port. Recommended Use another port to login. Action Severity WARNING Fabric OS Message Reference 291 53-1000600 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 344
38 IBPD-1003 292 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 345
cycle the switch. Severity ERROR ICPD-1002 Message , [ICPD-1002], ,, ERROR, , Failed to initialize rc = . Probable Cause Indicates that an initialization of a module within the ICPD failed. Recommended Download a new firmware version - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 346
Severity INFO ICPD-1007 Message , [ICPD-1007], ,, INFO, , iSNSC service is on the switch. Probable Cause Indicates that the iSNSC service is enabled or disabled on the switch. Recommended No action is required. Action Severity INFO ICPD-1008 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 347
Recommended No action is required. Action Severity INFO 39 ICPD-1008 Fabric OS Message Reference 295 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 348
39 ICPD-1008 296 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 349
, [IPAD-1001], ,, INFO, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 350
40 IPAD-1001 DRAFT: BROCADE CONFIDENTIAL 298 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 351
license to your switch. Severity WARNING IPS-1002 Message , [IPS-1002], ,, ERROR, , Failed to initialize rc = Probable Cause Indicates that an initialization of a module within the IPS daemon failed. Recommended Download a new firmware - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 352
>,, WARNING, , Tunnel Configuration Mismatch for slot () port() tunnel ID() reason () Probable Cause Indicates that tunnel setup failed due to a configuration mismatch between the two ends. Reasons for such a mismatch could be the Compression, SACK - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 353
-1000 Message , [ISCS-1000], ,, ERROR, , Slot Port GE crashed unexpectedly. Probable Cause Indicates that specified port has crashed. Recommended No action is required; the port will restart automatically. Action Severity ERROR - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 354
42 ISCS-1000 302 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 355
iSNS server slot/port /ge (current /ge). Probable Cause Indicates that the user has issued the isnscCfg command. Recommended No action is - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 356
-register with external iSNS server slot/port /ge. Probable Cause Indicates that the user has requested a re-register with the specified external internet storage name service (iSNS) server. Recommended No action is required. Action Severity INFO - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 357
. Recommended Retry with a valid slot/port. Refer to the appropriate hardware reference manual for valid slot and Action port ranges. Severity WARNING ISNS-1011 Message , [ISNS-1011], ,, INFO, , iSNS Client Service is - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 358
ISNS-1014], ,, INFO, , Start peering with external iSNS server on management port. Probable Cause Indicates that peering has started with the specified external internet storage name service (iSNS) on the management port. Recommended No action - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 359
(on dual-CP switches). The warning message will be any one of the following: • Probable Cause: One of the critical daemons ended unexpectedly. • Probable Cause: One - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 360
44 KSWD-1003 308 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 361
is required. Action Severity INFO KTRC-1003 Message , [KTRC-1003], ,, ERROR, , Cannot open ATA dump device Probable Cause Indicates that the ATA dump driver is not initialized properly. Recommended No action is required. Action Severity ERROR KTRC - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 362
45 KTRC-1005 Recommended No action is required. Action Severity ERROR KTRC-1005 Message , [KTRC-1005], ,, ERROR, , Trace initialization failed. . . Probable Cause Indicates that Trace was unable to - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 363
needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING LOG-1002 Message , [LOG-1002], , FFDC, WARNING, , A log message was dropped Probable Cause Indicates that a message was - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 364
46 LOG-1003 LOG-1003 Message , [LOG-1003], ,, INFO, , The log has been cleared. Probable Cause Indicates that the persistent error log has been cleared. Recommended No action is required. Action - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 365
valid domain ID, whose range is from 1 through 239. The switch will discard the record because it is not supported. Recommended No action is required. Action Severity ERROR LSDB-1002 Message , [LSDB-1002], ,, INFO, , Local Link State Record reached max - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 366
switchDisable and switchEnable commands. A new local link state record is generated Action during the switch enable. Severity CRITICAL LSDB-1004 Message , [LSDB-1004], ,, WARNING, , No Link State Record for domain Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 367
FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR MFIC-1002 Message , [MFIC-1002], ,, INFO, , Chassis FRU header not programmed for switch NID, using defaults (applies only to FICON environments - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 368
1003 IDID mode can be set using the configure command in the CLI or checking the Advanced Web Tools Switch Admin > Configure Tab > Fabric Subtab > Insistent Domain ID Mode checkbox. The switch must be disabled to change the IDID mode. Severity WARNING 316 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 369
that a link state record is null. Recommended No action is required. Action Severity ERROR MPTH-1003 Message , [MPTH-1003], ,, WARNING, , No minimum cost path in candidate list Probable Cause Indicates that the FSPF module has determined that there is - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 370
49 MPTH-1003 318 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 371
50 MQ-1004 Message , [MQ-1004], ,, ERROR, , mqRead, queue = - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 372
50 MQ-1004 320 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 373
. Recommended Action: Set the flag for the MS Platform Service. • The GCAP (MS Get Capabilities) is not supported by another switch. Recommended Action: Upgrade the firmware level on the switch to a level that supports RCS. • The request to the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 374
=BUSY) by> Run the firmwareDownload command to upgrade the firmware level on the switch to a level that supports RCS. RCS is supported in Fabric OS v2.6, v3.1 and greater, and contact your switch service provider. Severity INFO MS-1004 Message , [MS-1004], ,, INFO, < - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 375
neither response, which violates the Fibre Channel Generic Services (FS-GS) specification. Recommended Check the integrity of the FC switch at the specified domain. It and contact your switch service provider. Severity ERROR MS-1008 Message , [MS-1008], ,, ERROR, < - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 376
Message , [MS-1009], ,, ERROR, , RLIR event. Switch Port ID is . Device Port Tag is . . Probable Cause A are likely due to SAN hardware problems such as bad cables, small form-factor pluggables (SFPs), etc. It may be necessary to - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 377
MS-1023 MS-1023 Message , [MS-1023], ,, INFO, , Management Server Topology Discovery Service Probable Cause Indicates that Management Server Topology Discovery Service is being enabled or disabled. Recommended No action is required - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 378
51 MS-1024 326 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 379
, FFDC, ERROR, , Wrong input: to neighbor FSM, state , port between two connected switches has problems. Recommended Action Run the nbrStateShow command to check the neighbor state of the port listed in the message - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 380
sequence-number>,, WARNING, , DB_XMIT_SET flag not set in state , input , port - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 381
Run the firmwareDownload command to upgrade the remote switch with firmware v4.3 or higher, as appropriate for the switch type, so that it can support GMI to handle frame fragmentation and reassembly. You can also reduce the number of devices connected to the local switch. Severity WARNING NS-1002 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 382
be truncated. Recommended Reduce the zone size to 1024 or lesser, or upgrade the software of the remote switch to support Action 2048 zones. Severity WARNING NS-1006 Message , [NS-1006], ,, WARNING, , Duplicated WWN was detected with PID - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 383
to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1002 Message , [PDM-1002], ,, WARNING, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 384
to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1006 Message , [PDM-1006], ,, WARNING, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 385
the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1009 Message , [PDM-1009], ,, WARNING, , Can't update Port - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 386
to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1012 Message , [PDM-1012], ,, WARNING, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 387
to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1017 Message , [PDM-1017], , FFDC, CRITICAL, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 388
switch service provider. Severity WARNING PDM-1022 Message , [PDM-1022], ,, WARNING, , The switch is configured only with IPv6. Probable Cause Indicates that the parity data manager (PDM) cannot sync with its peer because the firmware does not support - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 389
Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 337 53 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 390
54 PDM-1024 338 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 391
bit set means that the WDT forced a chip reset. • All other code values are reserved. Recommended Run the pdShow command to view the panic dump and core dump files. Action Severity INFO PDTR-1002 Message , [PDTR-1002], ,, INFO, , < informational message - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 392
55 PDTR-1002 340 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 393
switch service provider. Severity CRITICAL PLAT-1001 Message , [PLAT-1001], ,, INFO, , CP resetting other CP (double reset problem. If Action the problem still persists, then replace the CP. Fabric - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 394
PLAT-1003 Message , [PLAT-1003], , FFDC, CRITICAL, , Slot C/BE: ADBUS: misc_intr . Probable Cause Indicates that a PCI bus hang - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 395
that exceed an internally set threshold on the port. This problem is typically related to hardware. Recommended Action Check and replace (if necessary) the hardware attached to both ends of the specified port number, including: • the media (SFPs) • the cable (fiber optic or copper ISL) • the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 396
57 PORT-1005 Recommended Invoke the portCfgLport to clear the L_port configuration. Action Severity WARNING 344 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 397
power cycle the switch to Action reinitiate the firmware. Severity CRITICAL PS-1001 Message , [PS-1001], ,, INFO, >, [PS-1003], ,, WARNING, , Failed to set end-to-end monitoring mask on ISL ports. Fabric OS Message Reference 345 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 398
is not supported on ISL ports when ISL monitoring is Action enabled. ISL monitoring can only be disabled through the Fabric Access API. Severity WARNING PS-1004 Message , [PS-1004], ,, WARNING, , Failed to add end-to-end monitors on port which is - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 399
. Action Severity INFO PSWP-1002 Message , [PSWP-1002], ,, INFO, , Port Swap feature enabled. Probable Cause Indicates that the portSwap feature has been enabled in the switch. Recommended No action is required. Action Severity INFO PSWP-1003 Message - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 400
59 PSWP-1003 348 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 401
) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity INFO RAS-1002 Message , [RAS-1002], ,, WARNING, , First failure data capture (FFDC) maximum storage size ( MB - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 402
switch service provider. Action Severity WARNING RAS-1006 Message , [RAS-1006], , INFO, , Support , [RAS-2002], , INFO, , Audit message log is disabled. Probable Cause A user has disabled the audit message log. - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 403
60 RAS-3001 Probable Cause A user has changed the configured classes of the audit feature. Recommended No action is required. Action Severity INFO RAS-3001 Message , [RAS-3001], , INFO, , USB storage device plug-in detected. Probable Cause Indicates that - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 404
60 RAS-3004 Recommended No action is required. Action Severity INFO 352 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 405
v2.6, v3.1 and greater, v4.1 and greater. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity INFO RCS-1002 Message , [RCS-1002], ,, INFO, , RCS has been enabled. Probable Cause Indicates that the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 406
.6, v3.1 and greater, v4.1 and greater. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity ERROR RCS-1005 Message , [RCS-1005], ,, INFO, , Phase , Application returned - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 407
61 RCS-1007 Severity INFO RCS-1007 Message , [RCS-1007], ,, ERROR, , Zone DB size and propogation overhead exceeds domain 's maximum supported Zone DB size . Retry after reducing the Zone DB size. Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 408
61 RCS-1008 356 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 409
,, WARNING, , Authentication Error: client \"\" has bad credentials: valid SSL certificate on the switch. Action Severity WARNING RPCD-1003 Message , [RPCD-1003], ,, WARNING, , - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 410
has been corrupted. Recommended To enable RPCD in Secure mode, install a valid SSL certificate the switch. Action Severity WARNING RPCD-1005 Message , [RPCD-1005], ,, WARNING, , Missing private key file. Secure RPCd is disabled. Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 411
Probable Cause Indicates that the RTWR has exhausted the maximum number of retries sending data to the specified domain. Possible detail values include: • RTWRTransmit: Max retries exhausted • detail1: Port • detail2: Domain • detail3: Retry Count • detail4: Status • detail5: Process ID - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 412
RTWR-1003 Message , [RTWR-1003], ,, INFO, , : RTWR retry to domain , iu_data the supportSave command and contact your switch service provider. Severity INFO 360 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 413
Chapter SAS System Messages 64 SAS-1001 Message , [SAS-1001], ,, ERROR, , string description of command which failed> of GE failed. Please retry the command. Data inst= st= rsn= - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 414
64 SAS-1001 362 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 415
Messages 65 SCN-1001 Message , [SCN-1001], , FFDC, CRITICAL, , SCN queue overflow for process switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 416
65 SCN-1001 364 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 417
) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1002 Message , [SEC-1002], ,, ERROR, , Security data fails: . Probable Cause Indicates that the receiving - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 418
security data after the specified number of attempts, and that the failed switch encountered an error accepting the database download. The primary switch will segment the failed switch after 30 tries. Recommended Action Reset the version stamp on the switch to 0 using the secVersionReset command - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 419
host is displayed in the message. Recommended Check for unauthorized access to the switch through the HTTP connection. Action Severity INFO SEC-1009 Message , [SEC-1009], ,, INFO, , Security violation: Unauthorized host with IP address - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 420
public key infrastructure (PKI) objects exist on the switch. If the private key does not exist, follow Guide. If a certificate does not exist or is invalid, install the certificate by following the field upgrade process. Severity WARNING SEC-1024 Message , [SEC-1024], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 421
is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1029 Message , [SEC-1029], ,, ERROR, , Invalid character in . Probable Cause Indicates that a corruption occurred during the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 422
error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1031 Message , [SEC-1031], ,, WARNING, , Current security policy DB cannot be supported by standby. CPs will go out of sync. Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 423
supports use of the asterisk for adding switches to policies. Recommended Action Run the secPolicyAdd command using a valid switch identifier (WWN, domain ID, or switch name) to add specific switches to the switch , [SEC-1036], ,, ERROR, , Device name - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 424
wildcards. Action Severity ERROR SEC-1041 Message , [SEC-1041], ,, ERROR, , Invalid port member in portlist (). . Probable Cause Indicates that the port member is invalid for one of the following reasons: • The value is - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 425
. The list can be a policy list or a switch member list. Recommended Do not specify any duplicates. Action Severity ERROR SEC-1045 Message Probable Cause , [SEC-1045], ,, ERROR, , Too many port members. Indicates that there has been a corruption during - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 426
in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1049 Message , [SEC-1049], ,, ERROR, , Invalid switch name . Probable Cause Indicates that there has been a corruption during the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 427
, [SEC-1051], ,, ERROR, , Missing brace for port list . Probable Cause Indicates that there configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 428
is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1055 Message , [SEC-1055], ,, ERROR, , Invalid FCS list Probable Cause Indicates that there has been a corruption during the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 429
the security database to the other switches in the fabric and local validation finds number supported are specified. Recommended Enter the correct number of domains. Action Severity ERROR SEC-1063 Message , [SEC-1063], ,, ERROR, , Failed to reset - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 430
by following the field upgrade process. Severity ERROR SEC-1065 Message , [SEC-1065], ,, ERROR, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 431
) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1073 Message , [SEC-1073], ,, ERROR, , No FCS policy in list! Probable Cause Indicates that the specific policy - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 432
for the change to take effect. Action Severity ERROR SEC-1077 Message , [SEC-1077], ,, ERROR, , Failed to activate new policy set on all switches. Probable Cause Indicates that the policy could not be activated. Possible reasons that the policy could not - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 433
the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1081 Message , [SEC-1081], ,, ERROR, , Entered a name for a DCC policy ID that was not unique. Probable Cause Indicates that the device connection - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 434
in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1084 Message , [SEC-1084], ,, ERROR, , Name exists for different type . Probable Cause Indicates that the specified policy already - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 435
> bytes. Probable Cause Indicates that the security database has more data than can be distributed to some of the switches in the fabric. Recommended Reduce the number of entries in the security policies to decrease the security database size. Action Severity ERROR SEC-1088 Message - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 436
is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1091 Message , [SEC-1091], ,, ERROR, , No policy to remove. Probable Cause Indicates that the specified policy member does not exist or the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 437
is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1095 Message , [SEC-1095], ,, ERROR, , Deleting FCS policy is not allowed. Probable Cause Indicates that there has been a corruption during - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 438
) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR SEC-1098 Message , [SEC-1098], ,, ERROR, , No FCS list. Probable Cause Indicates that the specified - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 439
SEC-1102 Message , [SEC-1102], ,, ERROR, , Fail to download . Probable Cause Indicates that the switch failed to download certificate, security database, or policies. This can happen when switch does not get enough resources to complete the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 440
specified in the Secure Fabric OS Administrator's Guide. Severity ERROR SEC-1105 Message , [SEC-1105], ,, ERROR, , Fail to disable secure mode on all switches. Probable Cause Indicates that the switch failed to disable security in the fabric. This - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 441
number>,, ERROR, , Fail to reset stamp on all switches. Probable Cause Indicates that a version reset operation failed either because the switch be the first policy in the defined security database. Recommended Download a correct configuration with the FCS policy as the first policy - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 442
sure that the new FCS policy is the same as the current FCS policy on the switch. Action Severity ERROR SEC-1113 Message , [SEC-1113], ,, WARNING, , [ license ] going to expire in day(s). Probable Cause Indicates that the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 443
], ,, INFO, , Fail to set . Probable Cause Indicates that the switch failed to save the data received by the primary fabric configurations server (FCS) switch. This data can be an FCS password, a non-FCS password, SNMP data, or multiple user authentication data - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 444
in fabric are in the ready state. When Action all switches are in the ready state, retry the operation. Severity INFO SEC-1123 Message , [SEC-1123], ,, INFO, , Security database downloaded by Primary FCS. Probable Cause Indicates that the security - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 445
[SEC-1130], ,, INFO, , The Primary FCS has failed over to a new switch. Probable Cause Indicates that an sequence-number>,, INFO, , Secure fabric version stamp has been reset. Probable Cause Indicates that the version stamp of the secure fabric is reset. - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 446
Message , [SEC-1138], ,, INFO, , Security database download received from Primary FCS. Probable Cause Indicates that a non-primary fabric configurations server (FCS) switch received a security database download. Recommended Action Verify that the security - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 447
-number>,, ERROR, , The RSNMP_POLICY cannot exist without the WSNMP_POLICY. Probable Cause Indicates that the receiving switch fails occurred: • The names for the specified policies have changed. • The passwords have changed for the specified accounts. • The SNMP community strings have - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 448
support RCS, obtain the latest firmware version from your switch supplier, and run the firmwareDownload command to upgrade the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 449
) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO SEC-1158 Message , [SEC-1158], ,, INFO, , Invalid name . Fabric OS Message Reference 397 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 450
updated for that specific switch. Severity INFO SEC-1160 Message , [SEC-1160], ,, INFO, , Duplicate port in port list (). Probable Cause Indicates that a duplicate port member exists in the specified port list. Recommended Verify - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 451
lockdown option to enable security. Action Severity ERROR SEC-1165 Message , [SEC-1165], ,, ERROR, , Low memory, failed to enable security on all switches. Probable Cause Indicates that the system is low on memory. Recommended Wait a few minutes and try - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 452
Message , [SEC-1171], ,, ERROR, , Disabled secure mode due to invalid security object. Probable Cause Indicates that the switch is segmented, and secure mode is disabled on the switch because there was no license present or no public key infrastructure (PKI - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 453
SEC-1172 Run the licenseAdd command to install the required license key. Refer to your switch supplier to obtain a license if you do not have one. Severity ERROR SEC-1172 Message , [SEC-1172], ,, ERROR, , Failed to identify role. Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 454
been created. Recommended No action is required. Action Severity INFO SEC-1181 Message , [SEC-1181], ,, INFO, , Deleted account Probable Cause Indicates that the specified account has been deleted. Recommended No action is required. Action - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 455
-1185], ,, INFO, , switch DB. Probable Cause Indicates that the switch database was enabled or disabled as the secondary authentication, accounting, and authorization (AAA) mechanism when the Remote Authentication Dial-in User Service (RADIUS) / Lightweight - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 456
sequence-number>,, INFO, , Configuration. Probable Cause Indicates that the remote authentication dial-in user service ( tries to FLOGI to index/area of switch . Probable Cause Indicates that a device connection control - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 457
fabric. Take appropriate action, as defined by your enterprise security policy. Severity INFO SEC-1190 Message , [SEC-1190], ,, INFO, , Security violation: Unauthorized host with IP address tries to do SNMP read operation. Probable Cause - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 458
. Verify that this IP address is being used by a valid Action switch admin. Use the correct password. Severity INFO SEC-1194 Message , [SEC-1194], ,, WARNING, , This switch does not have all the required PKI objects correctly installed. Probable Cause - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 459
>, [SEC-1196], ,, WARNING, , Switch does not have all default account names. Probable Cause Indicates that the default switch accounts admin and user do not exist on the switch when enabling security. Recommended Reset the default admin and user account names on the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 460
66 SEC-1199 Severity INFO SEC-1199 Message , [SEC-1199], ,, INFO, , Security violation: Unauthorized access to serial port of switch . Probable Cause Indicates that a serial connection policy security violation was reported. An attempt - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 461
-number>,, INFO, , Security violation: Unauthorized access from MS device node name , device port name - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 462
run the supportSave command and contact your switch service provider. Severity ERROR SEC-1300 Message , [SEC-1300], ,, INFO, , This switch is in VcEncode mode. Security is not supported. Probable Cause Indicates that the switch is set up with VC-encoded - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 463
for your specific Action switch. Verify that the firmware you are installing supports the Brocade Secure Fabric OS feature. Severity INFO SEC-1304 Message , [SEC-1304], ,, INFO, , This switch has no security license. Probable Cause Indicates that - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 464
Message , [SEC-1308], ,, INFO, , All %s servers have failed to respond. Probable Cause Indicates that all servers in the remote authentication dial-in user service (RADIUS) configuration have failed to respond to a switch request within the specified time - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 465
to the default value. Then verify with passwdCfg --show that password policies are set to the default values on all switches and retry the secModeEnable command. Severity ERROR SEC-1312 Message , [SEC-1312], ,, INFO, , . Fabric OS Message - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 466
failed. Recommended Please reboot the system to fix this error. If the problem persists contact your switch service Action provider. Severity ERROR SEC-1315 Message , [SEC-1315], ,, ERROR, , command failed - - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 467
WARNING, , policy is conflicting with domain Probable Cause Indicates that the newly added switches to the fabric, as specified by Domain Number, have a conflicting policy with the local switch. Recommended Check the conflicting policy and make the new - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 468
, [SEC-1322], ,, WARNING, , Some DCC policy is too large, distribution cancelled Probable Cause Indicates that this fabric is not able to support a device connection control (DCC) policy with more than 256 ports. Recommended Reconfigure any policy that - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 469
-number>,, INFO, , Fabric transaction failure. RCS error: Probable Cause Indicates that the reliable commit service [SEC-1325], ,, ERROR, , Security enforcement: Switch connecting to port is not authorized to - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 470
Recommended Action None, the domain is denied by disallowing all its E-ports connected to the fabric. If the domain should be allowed to command Action and contact your switch service provider. Severity ERROR SEC-1330 Message , [SEC-1330], ,, ERROR, , - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 471
, [SEC-1331], ,, ERROR, , Attempt to enable secure mode failed. Reason: . Probable Cause Indicates that the secModeEnable command failed on the fabric, because default IP Filter policies are not active on the switch, or an active transaction exists on - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 472
66 SEC-1332 420 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 473
that the simple network management protocol (SNMP) service could not be started because of the specified Reason. You will not be able to query the switch through SNMP. Recommended Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly. If the Action specified - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 474
service will not work correctly. Recommended Change the SNMP configuration back to the default. Action Severity ERROR SNMP-1005 Message , [SNMP-1005], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 475
set the FTP or SCP parameters. Action After the problem is corrected, rerun the supportSave command. Severity WARNING SS-1002 Message , [SS-1002], ,, INFO, , supportSave has stored support information to the USB storage device. Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 476
SS-1003 SS-1003 Message , [SS-1003], ,, WARNING, , supportSave's operation to USB storage usbstorage to check the USB storage device settings. After the USB problem is corrected, Action rerun the supportSave command. Severity WARNING 424 Fabric OS - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 477
Do not fail over or power down the system during firmware upgrade. No action is required. Run the firmwareDownloadStatus command for more information. Severity WARNING SULB-1002 Message , [SULB-1002],, AUDIT, INFO, , Firmwaredownload command has completed - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 478
command for more information. Severity INFO SULB-1006 Message , [SULB-1006], ,, INFO, , Forced failover succeeded. New Active CP is running new firmware. Probable Cause Indicates that the previous standby has now become the active CP and is running - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 479
69 SULB-1008 SULB-1008 Message , [SULB-1008], ,, INFO, , Standby CP booted successfully with new firmware. Probable Cause Indicates that the standby CP has rebooted successfully. Recommended Action No action is required. The firmwareDownload command is - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 480
secondary partition. Please use firmwareDownloadStatus and firmwareShow to see firmware status." "firmwareDownload has started on Standby CP. up." "Standby CP booted up with new firmware." "Standby CP failed to boot up with new firmware." "firmwareDownload has completed successfully on Standby CP." - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 481
started to restore the secondary partition." 0x93 "firmwareCommit failed." 0x94 "The secondary partition has been restored successfully." 0x95 "Firmware is being downloaded to the blade. This step may take up to 10 minutes." 0xa0 "firmwareDownload timed out." 0xa1 "Reboot occurred during - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 482
. Check whether the switch is supported by the requested firmware. Also check firmwareDownload help page for other possible failure reasons." 0x12 "The RPM package database is inconsistent. Contact your service provider for recovery." 0x13 "Out of memory." 0x14 "Failed to download RPM package - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 483
after firmwareDownload is started, the firmware on the switch may be two releases older than the requested firmware. firmwareDownload supports firmware upgrades within two feature releases (a feature release is indicated by a major number and a minor number, for example, X.Y). The following are - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 484
reset the chassisConfig option before retrying firmwareDownload. 0x2e - Invalid Red Hat package manager (RPM) package. This error maybe caused by an inconsistent firmware issues. Please reload firmware packages on the file server, then retry firmwareDownload. If the problem persists, contact your - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 485
firmwareDownload single mode (-s) to upgrade the firmware on the standby CP to the same version as the active CP. Then retry firmwareDownload to download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting information. Severity INFO SULB - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 486
. If the problem persists, contact your switch service provider. Severity ERROR SULB-1021 Message Probable Cause , [SULB-1021],, AUDIT, WARNING, , Firmware is being downloaded to the blade in slot . Indicates that the firmware is being loaded - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 487
to monitor the progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1024 Message , [SULB-1024], AUDIT, WARNING, , Firmware commit has completed on the blade in slot . Probable Cause Indicates that the firmwareCommit - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 488
Action command to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message , [SULB-1031], , AUDIT, WARNING, , The switch is relocating an internal firmware image. 436 Fabric OS Message Reference - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 489
by inconsistent internal firmware image. It may also be caused by the internal Ethernet or persistent storage hardware failure. Recommended Reset the switch. This will cause the internal image to be relocated again. If the problem persists, Action contact your switch service provider. Severity - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 490
generally logged before download and after download of the firmware to store version information. Recommended No action is required. Action Severity INFO SULB-1037 Message , [SULB-1037], , AUDIT, INFO, , HCL failed. Reboot the switch manually using the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 491
supportSave command and contact your switch service provider. Severity ERROR SWCH-1002 Message , [SWCH-1002], ,, INFO, , Security violation: Unauthorized device tries to flogin to port . Probable Cause Indicates that the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 492
fabric. Recommended Load a firmware version on standby that supports NPIV functionality, using the firmwareDownload Action command. Severity WARNING SWCH-1007 Message Probable Cause , [SWCH-1007], ,, WARNING, , Switch port disabled due to - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 493
Replace the blade with ports that support port swap. Then port swap the ports back to ports default area. Refer to the Fabric OS Administrator's Guide for more information on port swapping. Severity WARNING SWCH-1009 Message , [SWCH-1009], ,, WARNING, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 494
Cause Indicates that the standby control processor (CP) does not support Trunk Area functionality, but the switch has some ports with Trunk Area enabled. Recommended Load a firmware version on standby that supports Trunk Area functionality, using the Action firmwareDownload command. Severity - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 495
two versions of firmware or the nonvolatile storage might be corrupted. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL SYSC-1002 Message , [SYSC-1002], , FFDC - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 496
restarted by system automatically. Recommended Use the supportSave command to gather troubleshooting data. No further action is required. Action Severity INFO SYSC-1005 Message , [SYSC-1005], ,, WARNING, , Daemon is not restarted - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 497
the supportSave command and contact your switch service provider. Severity CRITICAL SYSM-1002 Message , [SYSM-1002], ,, INFO, , , Switch: Probable Cause Indicates that a user has executed either the switchShutdown or switchReboot - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 498
CRITICAL SYSM-1006 Message , [SYSM-1006], , FFDC, CRITICAL, , CP blade in slot is incompatible with the chassis type. Probable Cause Indicates that this chassis type is not compatible with the control processor (CP) blade. Recommended Use - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 499
• MANUAL generated by the tracedump -n command Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity WARNING TRCE-1002 Message , [TRCE-1002], ,, INFO - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 500
) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR TRCE-1004 Message , [TRCE-1004], ,, WARNING, , Trace dump< optional slot indicating on which slot the dump occurs > was - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 501
(as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR TRCE-1010 Message , [TRCE-1010], ,, ERROR, , Traced fails to start Fabric OS Message Reference 449 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 502
up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR TRCE-1011 Message , [TRCE-1011], ,, INFO, , Trace dump manually transferred to target ' - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 503
-1002 Message , [TRCK-1002], ,, INFO, , Unsuccessful login by user . Probable Cause Indicates that the track change feature recorded a failed login. This occurs if the user name or password is entered incorrectly. Recommended Action Normally, this - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 504
that the track change feature recorded a configuration change for the switch. The track change feature records any change to the configuration Action Severity INFO TRCK-1005 Message , [TRCK-1005], ,, INFO, , Track-changes on Probable Cause Indicates that - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 505
choose another. Severity WARNING TS-1002 Message , [TS-1002], ,, INFO, , < Type of clock server used > Clock Server switch and functional. If the principal or primary FCS does not support the feature, either choose a different switch for the role or reset - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 506
number>,, INFO, , Probable Cause Indicates that a time service event is occurring or has failed. The message might be one of the following: • Init failed. Time Service ], ,, WARNING, , Probable Cause Indicates that a switch is trying - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 507
Severity WARNING 75 TS-1008 Fabric OS Message Reference 455 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 508
75 TS-1008 456 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 509
Severity INFO UCST-1007 Message , [UCST-1007], , FFDC, CRITICAL, , Inconsistent route detected: Port = , should be Probable Cause Indicates that the switch detected an inconsistency in the routing database between the routing - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 510
76 UCST-1020 458 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 511
,, WARNING, , No minimum cost path in candidate list Probable Cause Indicates that the specified switch is unreachable because no minimum cost path (FSPF UPATH) exists in the candidate list (domain ID list). Recommended No action is required. This will end - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 512
77 UPTH-1001 460 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 513
file is either invalid or absent. Recommended Install a valid key file. Action Severity WARNING WEBD-1002 Message , [WEBD-1002], ,, WARNING, , Missing or Invalid Key file -- HTTPS is configured but could not be started. Probable Cause Indicates that the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 514
Cause Indicates that the IP address of the switch changed and the HTTP server is restarted. number>, FFDC, WARNING, , HTTP server cannot be started Probable Cause Indicates a rare error condition, where the built-in recovery process has failed to restore http services. The problem - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 515
System Messages 79 ZOLB-1001 Message , [ZOLB-1001], ,, ERROR, , ZONELIB Probable Cause Indicates that to save these core files and contact your switch service provider. Severity ERROR Fabric OS Message Reference 463 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 516
79 ZOLB-1001 464 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 517
run the Action supportSave command and contact your switch service provider. Severity WARNING ZONE-1003 Message , [ZONE-1003], ,, WARNING, , zone() contains (, ) which does not exist. Probable Cause Indicates that - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 518
mix the methods used to define these zone members. Severity INFO ZONE-1006 Message , [ZONE-1006], ,, WARNING, , WARNING WWN() in HARD PORT zone . Probable Cause Indicates that one or more devices are zoned as world-wide name (WWN - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 519
this problem. • Avoid having too many hosts zoned with a set of target devices at a single port. • Avoid having too many zones directed at a single port group on the switch. Severity INFO ZONE-1008 Message , [ZONE-1008], ,, WARNING, , WARNING - port - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 520
switch, it will not be supported. Recommended Edit the zone database to remove the QuickLoop zoning definition in the effective configuration. Action Severity WARNING ZONE-1014 Message , [ZONE-1014], ,, ERROR, , Missing required license - - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 521
supported in Fabric OS v4.x and above. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR ZONE-1019 Message , [ZONE-1019], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 522
of the port is busy. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity INFO ZONE-1024 Message , [ZONE-1024], ,, INFO, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 523
• User Command: A user aborted the current zoning transaction. • Switch Shutting Down: The switch is Guide for information on the zone database sizes supported for each switch. Severity WARNING ZONE-1029 Message Probable Cause Recommended Action , [ZONE-1029], - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 524
command and contact your switch service provider. Severity WARNING ZONE-1030 Message , [ZONE-1030], ,, WARNING, - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 525
firmwareDownload command to reinstall the firmware. Action Severity WARNING ZONE-1035 Message , [ZONE-1035], ,, ERROR, , zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 526
Action Severity ERROR ZONE-1038 Message , [ZONE-1038], ,, ERROR, , Unable to allocate memory for - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 527
-name>, Unstable link detected during merge at port (). Probable Cause Indicates a possible unstable link or faulty cable. Recommended Check the SFP and cable at the specified port and verify that they are not faulty. Replace the SFP Action and cable as necessary. Severity WARNING - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 528
1047], ,, INFO, , Switch domain () does not support defined database. Probable Cause Indicates that remote Brocade switch is running downlevel version of FOS that does not suppport the defined database. Recommended It is recommended to upgrade all swtiches to - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 529
Audit Log Messages Section II This section provides the Audit messages, including: •AUDIT AUTH System Messages 479 •AUDIT CONF System Messages 483 •AUDIT FW System Messages 485 •AUDIT HTTP System Messages 487 •AUDIT SEC System Messages 489 •AUDIT SNMP System Messages 505 •AUDIT SULB System - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 530
- HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 531
AUDIT AUTH System Messages Chapter 2 AUTH-3001 Message AUDIT, , [AUTH-3001], INFO, SECURITY, , , , Event: , Status: success, Info: type has been changed from [] to []. Probable Cause Indicates that - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 532
port because switch policy is turned off. Probable Cause Indicates that the local switch has rejected the authentication request, because the switch policy is turned off. If the neighboring switch has a strict (ON) switch your switch service provider. Severity INFO 480 Fabric - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 533
the supportSave command and contact your switch service provider. Severity INFO AUTH-3008 Message AUDIT, , [AUTH-3008], INFO, SECURITY, , , , Event: , Status: failed, Info: Port has been disabled due to authentication - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 534
2 AUTH-3008 482 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 535
of configuration parameters that were downloaded. If admin domain (AD) is enabled, the AD number is specified in the description. Downloading configuration without disabling the switch was unsuccessful. Probable Cause The system attempted to download a configuration without disabling the switch - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 536
3 CONF-1022 484 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 537
INFO, , , , Event: , Status: success, Info: Probable Cause Indicates that Port Fencing was enabled/disabled successfully. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 485 53-1000600 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 538
4 FW-3001 486 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 539
-1002 Message AUDIT, , [HTTP-1002], INFO, ZONE, , , , Zoning transaction initiated by User: , Role: completed successfully. Probable Cause Indicates that the zoning database has been changed. Recommended Verify that the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 540
5 HTTP-1003 488 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 541
server (FCS) failover. • A security policy has been activated. • A security policy has been saved. • A security policy has been aborted. • A non-FCS password has changed. Recommended Action Verify that the security event was planned. If the security event was planned, no action is required. If the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 542
6 SEC-3004 Probable Cause Indicates that a new security policy was created with entries. Note: If you use a wildcard (for example, an asterisk) in creating a policy, the audit report displays the wildcard in the event info field. Recommended Action Verify that the new policy creation was planned - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 543
SEC-3007 6 Probable Cause Indicates that a user has removed the specific members from the specified security policy. Note: If you use a wildcard (for example, an asterisk) in removing members from a policy, the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 544
Probable Cause Indicates that a user has reset the password for the specified user accounts. Recommended Action Verify that the password was intentionally reset. If the password was intentionally reset, no action is required. If the password was not intentionally reset, take appropriate action as - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 545
success, Info: Moved RADIUS server to position . Probable Cause Indicates that a user has changed the position of the remote authentication dial-in user service (RADIUS) server. Recommended Action Verify that the RADIUS server position was intentionally changed. If the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 546
-location>, , Event: , Status: success, Info: . Probable Cause Indicates that a user has changed the remote authentication dial-in user service (RADIUS) configuration. Recommended Action Verify that the RADIUS configuration was intentionally changed. If the RADIUS - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 547
SEC-3018 6 SEC-3018 Message AUDIT, , [SEC-3018], INFO, SECURITY, , , , Event: , Status: success, Info: Parameter [] changed from [] to []. Probable Cause Indicates that the specified passwdCfg - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 548
manually unlock the account. Severity INFO SEC-3024 Message AUDIT, , [SEC-3024], INFO, SECURITY, , , , Event: , Status: success, Info: User account [], password changed. Probable Cause Indicates that the user's password - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 549
>, [SEC-3025], INFO, SECURITY, , , , Event: , Status: success, Info: User account [] added. Role: [], Password [], Home AD [], AD list []. Probable Cause Indicates a new - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 550
: success, Info: Backup user account \"\" recovered. Probable Cause Indicates that back user accounts were recovered. Recommended Status: success, Info: Distributed db(s) to domain(s), dom-id(s). Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 551
, , Event: , Status: success, Info: Switch is configured to database. Probable : Fabric wide configuration set to . Probable Cause Indicates that the specified event has occurred. Recommended - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 552
6 SEC-3036 Recommended Action Verify that the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-3036 Message AUDIT, , [ - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 553
the message. Recommended Check for unauthorized access to the switch through the specified protocol connection. Take Action appropriate action Key> [ license ] is expired. Probable Cause Indicates that the license period has expired. Recommended Get a new license for this feature. Action - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 554
-details>, , RBAC permission denied for CLI : . Probable Cause Indicates that the user does not have permission to execute this command. Recommended Verify that the user has the required permission to execute this command. Action Severity INFO SEC-3048 Message AUDIT - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 555
SEC-3049 6 Severity INFO SEC-3049 Message AUDIT, , [SEC-3049], INFO, SECURITY, , , Status of bootprom access is changed using fipscfg CLI to : . Probable Cause Indicates that the status of bootprom access is changed using the - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 556
6 SEC-3050 504 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 557
SNMP) configuration s incorrect and the SNMP service will not work correctly. Recommended Reset the SNMP configuration to default. Action >, , , configuration was reset to default. Probable Cause Indicates that the simple network management protocol - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 558
7 SNMP-1006 506 Fabric OS Message Reference 53-1000600-02 - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 559
disruption. Do not fail over or power down the system during firmware upgrade. Run the firmwareDownloadStatus command for more information. Severity WARNING SULB that the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No action is - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 560
failed on Standby CP." "firmwareCommit failed on Standby CP." "firmwareDownload failed." "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due to IPC error." "firmwareDownload failed due to IPC error." "Standby - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 561
secondary partition. Please use firmwareDownloadStatus and firmwareShow to see firmware status." "firmwareDownload has started on Standby CP. up." "Standby CP booted up with new firmware." "Standby CP failed to boot up with new firmware." "firmwareDownload has completed successfully on Standby CP." - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 562
started to restore the secondary partition." 0x93 "firmwareCommit failed." 0x94 "The secondary partition has been restored successfully." 0x95 "Firmware is being downloaded to the blade. This step may take up to 10 minutes." 0xa0 "firmwareDownload timed out." 0xa1 "Reboot occurred during - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 563
. Check whether the switch is supported by the requested firmware. Also check firmwareDownload help page for other possible failure reasons." 0x12 "The RPM package database is inconsistent. Contact your service provider for recovery." 0x13 "Out of memory." 0x14 "Failed to download RPM package - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 564
after firmwareDownload is started, the firmware on the switch may be two releases older than the requested firmware. firmwareDownload supports firmware upgrades within two feature releases (a feature release is indicated by a major number and a minor number, for example, X.Y). The following are - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 565
reset the chassisConfig option before retrying firmwareDownload. 0x2e - Invalid Red Hat package manager (RPM) package. This error maybe caused by an inconsistent firmware issues. Please reload firmware packages on the file server, then retry firmwareDownload. If the problem persists, contact your - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 566
firmwareDownload single mode (-s) to upgrade the firmware on the standby CP to the same version as the active CP. Then retry firmwareDownload to download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting information. Severity INFO SULB - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 567
firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1021 Message AUDIT, , [SULB-1021], WARNING, FIRMWARE, , , , Firmware is being downloaded to the blade in slot . Probable Cause - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 568
. If the problem persists, contact your switch service provider. Severity WARNING SULB-1024 Message AUDIT, , [SULB-1024], WARNING, FIRMWARE, , , , Firmware commit has completed on the blade in slot . Probable Cause Indicates - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 569
rebooted. Run the firmwareDownloadStatus Action command to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message AUDIT, , [SULB-1032], WARNING, FIRMWARE, , , , Relocating an internal - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 570
to be relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR SULB-1037 Message AUDIT, , [SULB-1037], ERROR, FIRMWARE, , , , HCL failed. Reboot the switch manually using the reboot command. However - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 571
added to the specified zone object set. The zone object type can be "alias", "zone member", "zone" or "zone configuration". The string "..." appears at the end of the zone object member list if the list was truncated in the message. Recommended Verify that the event was planned. If the event was - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 572
member", "zone" or "zone configuration". The string "..." appears at the end of the zone object member list if the list was truncated in the "zone member", "zone" or "zone configuration". The string "..." appears at the end of the zone object member list if the list was truncated in the message. - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 573
ZONE-3007 9 ZONE-3007 Message AUDIT, , [ZONE-3007], INFO, ZONE, , , , Event: , Status: success, Info: Zone configuration \"\" enabled. . Probable Cause Indicates that the specified zone configuration has - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 574
9 ZONE-3011 Severity INFO ZONE-3011 Message AUDIT, , [ZONE-3011], INFO, ZONE, , , , Event: , Status: success, Info: Zone object \"\" expunged. Probable Cause Indicates that the specified zone object has been - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 575
set type is "AD member". The string "..." appears at the end of the AD object member list if the list was truncated been created. An AD object set type is "AD member". The string "..." appears at the end of the AD object member list if the list was truncated in the message. Recommended Verify that - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 576
9 ZONE-3018 ZONE-3018 Message AUDIT, , [ZONE-3018], INFO, FABRIC, , , , Event: , Status: success, Info: has been deactivated. Probable Cause Indicates that the specified admin domain (AD) object has been deactivated - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 577
ZONE-3022 9 Severity INFO ZONE-3022 Message AUDIT, , [ZONE-3022], INFO, FABRIC, , , , Event: , Status: success, Info: Current AD configuration saved to flash. Probable Cause Indicates that the current admin domain (AD) - HP StorageWorks 8/80 | Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 578
9 ZONE-3025 Severity INFO 526 Fabric OS Message Reference 53-1000600-02
53-1000600-02
12 March 2008
Fabric OS
Message Reference
Supporting Fabric OS v6.1.0