HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 107

BL-1023 5 BL-1023 Message , [BL-1023], ,, CRITICAL, , Blade in slot was reset before blade init completed. As a result the blade is faulted. Probable Cause Indicates that the blade was reset before the initialization completed. Recommended Action Reboot or power cycle the blade. If the message persists, replace the blade. Severity CRITICAL BL-1024 Message , [BL-1024], ,, INFO, , All ports on the blade in slot will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the blade's firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all datapath elements were reset. Recommended No action is required. Action Severity INFO BL-1025 Message , [BL-1025], ,, INFO, , All GigE/FCIP Virtualization ports on the blade in slot will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the blade's firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all GigE/Fibre Channel over IP (FCIP) Virtualization data elements were reset. Recommended No action is required. Action Severity INFO BL-1026 Message Probable Cause , [BL-1026], ,, CRITICAL, , Internal port offline during warm recovery, state (0x). Indicates that an internal port went offline during the warm recovery of the switch.The switch will reboot and start a cold recovery. Fabric OS Message Reference 55 53-1000600-02