HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 147

Chapter ESS System Messages 13 ESS-1001 Message , [ESS-1001], ,, WARNING, , A few switches in the fabric do not support the Coordinated HotCode protocol. Probable Cause One or more switches in the fabric do not support the Coordinated HotCode protocol. Continuing with the firmware download may cause data traffic disruption. Recommended Action Discontinue the firmware download, identify the downlevel switch or switches that do not support the Coordinated HotCode protocol, and upgrade the downlevel switches. Then, restart the firmware download on this switch. Note that upgrading a downlevel Brocade switch in a mixed interop fabric may still cause data traffic disruption. Severity WARNING ESS-1002 Message , [ESS-1002], ,, WARNING, , The pause message is rejected by the domain . Probable Cause During the Coordinated HotCode protocol, a switch in the fabric has rejected the pause message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to the rejected pause message. Recommended No action is required. Action Severity WARNING ESS-1003 Message , [ESS-1003], ,, WARNING, , The pause retry count is exhausted for the domain . Probable Cause During the Coordinated HotCode protocol, a switch in the fabric did not accept the pause message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to this issue. Recommended No action is required. Action Severity WARNING Fabric OS Message Reference 95 53-1000600-02