HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 335

Chapter HLO System Messages 34 HLO-1001 Message , [HLO-1001], , FFDC, ERROR, , Incompatible Inactivity timeout from port , correct value . Probable Cause Indicates that the HLO message was incompatible with the value specified in the FSPF protocol. The Brocade switch will not accept FSPF frames from the remote switch. In the Fabric OS, the HLO dead timeout value is not configurable, so this error can only occur when the Brocade switch is connected to a switch from another manufacturer. Recommended The dead timeout value of the remote switch must be compatible with the value specified in the Action FSPF protocol. Refer to documentation of the other manufacturer's switch to change this value. Severity ERROR HLO-1002 Message , [HLO-1002], , FFDC, ERROR, , Incompatible Hello timeout from port , correct value . Probable Cause Indicates that the HLO message was incompatible with the value specified in the FSPF protocol. The Brocade switch will not accept FSPF frames from the remote switch. In the Fabric OS, the HLO timeout value is not configurable, so this error can only occur when the Brocade switch is connected to a switch from another manufacturer. Recommended The HLO timeout value of the remote switch must be compatible with the value specified in the Action FSPF protocol. Refer to documentation of the other manufacturer's switch to change this value. Severity ERROR HLO-1003 Message Probable Cause , [HLO-1003], , FFDC, ERROR, , Invalid Hello received from port , Domain = , Remote Port =. Indicates that the HLO message received was invalid and the frame was dropped. The Brocade switch will not accept FSPF frames from the remote switch. Fabric OS Message Reference 283 53-1000600-02