HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 435

66 SEC-1087 Probable Cause Indicates that the security database has more data than the flash can accommodate. Recommended Reduce the number of entries in some policies to decrease the security database size. Action Severity ERROR SEC-1087 Message , [SEC-1087], ,, ERROR, , The security database is larger than the data distribution limit of fabric bytes. Probable Cause Indicates that the security database has more data than can be distributed to some of the switches in the fabric. Recommended Reduce the number of entries in the security policies to decrease the security database size. Action Severity ERROR SEC-1088 Message , [SEC-1088], ,, ERROR, , Cannot execute the command. Please try later. Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1089 Message , [SEC-1089], ,, ERROR, , Policy name was not found. Probable Cause Indicates that the security policy name in the secPolicyAdd command does not exist. Recommended Create the appropriate security policy first, then use its name in the secPolicyAdd command to add Action new members. Severity ERROR Fabric OS Message Reference 383 53-1000600-02