HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 212

23 FICN-1041 FICN-1041 Message , [FICN-1041], ,, ERROR, , HostTapeEgr:AS Link Level Reject (LRJ) from CU Rx Path= LastCmd=0x LastStatus=0x. Probable Cause An LRJ received from a device indicates that the CU has lost the logical path to the LPAR. Recommended If this was an unexpected event, please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1042 Message , [FICN-1042], ,, WARNING, , HostTapeIng:FICON Cancel received Path= state=0x. Probable Cause A job was cancelled during write pipelining. Recommended If this was an unexpected event (cancel is normally an operator event), please contact your Action vendor's customer support for assistance. Severity WARNING FICN-1043 Message , [FICN-1043], ,, ERROR, , HostTapeIng::FICON Selective Reset:Path= state=0x LastCmds=0x LastStatus=0x. Probable Cause Protocol errors in emulation in the CU or network errors can cause Selective Reset. Recommended If this was an unexpected event, please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1044 Message , [FICN-1044], ,, ERROR, , HostTapeIng:FICON Selective Reset:Path= Elapsed Time=. seconds. 160 Fabric OS Message Reference 53-1000600-02