HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 450

66 SEC-1159 Probable Cause Indicates that the specified name is invalid. The name can be a policy name or a switch name. Recommended Enter a valid name. Action Severity INFO SEC-1159 Message , [SEC-1159], ,, INFO, , Non_Reachable domain . Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity INFO SEC-1160 Message , [SEC-1160], ,, INFO, , Duplicate port in port list (). Probable Cause Indicates that a duplicate port member exists in the specified port list. Recommended Verify that there is no duplicate member in the port list. Action Severity INFO SEC-1163 Message , [SEC-1163], ,, ERROR, , System is already in secure mode. Lockdown option cannot be applied. Probable Cause Indicates that the lockdown option was attempted while the fabric is already in secure mode. Recommended Do not use the lockdown option with the secModeEnable command when switch is already in Action secure mode. Severity ERROR 398 Fabric OS Message Reference 53-1000600-02