HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 433

66 SEC-1079 SEC-1079 Message , [SEC-1079], ,, ERROR, , The policy name is invalid. Probable Cause Indicates that the policy name entered in the secPolicyCreate|Activate|Add|Delete command was invalid. Recommended Run the command again using a valid policy name. Action Severity ERROR SEC-1080 Message , [SEC-1080], ,, ERROR, , Operation denied. Please, use secModeEnable command. Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1081 Message , [SEC-1081], ,, ERROR, , Entered a name for a DCC policy ID that was not unique. Probable Cause Indicates that the device connection control (DCC) policy name given in the secPolicyCreate command was the same as another DCC policy. Recommended Make sure that the DCC policy name has a unique alpha-numeric string, and run the Action secPolicyCreate command again. Severity ERROR SEC-1082 Message Probable Cause , [SEC-1082], ,, ERROR, , Failed to create policy. Indicates that the security policy was not created due to faulty input or low resources. Fabric OS Message Reference 381 53-1000600-02