HP StorageWorks 8/80 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 131

12 EM-1006 EM-1006 Message , [EM-1006], , FFDC, CRITICAL, , has faulted. Sensor(s) below minimum limits. Probable Cause Indicates that the sensors show the voltage is below minimum limits. The switch or specified blade is being shut down for environmental reasons; the voltage is too low. Recommended Action If this problem occurs on a blade, it usually indicates a hardware problem on the blade; replace the blade. If this problem occurs on a switch, it usually indicates a hardware problem on the main board; replace the switch. Severity CRITICAL EM-1007 Message , [EM-1007], , FFDC, CRITICAL, , is being reset. Sensor(s) has exceeded max limits. Probable Cause Indicates that the voltage on a switch has exceeded environmental limits. A reset is sent to the faulty slot or the switch for nonbladed switches. Recommended Action There is most likely a voltage hardware problem on the blade or motherboard of the switch. For the Brocade DCX, 24000 and 48000, replace the blade field-replaceable unit (FRU). For the Brocade 3900 replace the motherboard FRU. For the Brocade 200E, 3016, 3250, 3850, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, 7500, AP7600, replace the switch. Severity CRITICAL EM-1008 Message , [EM-1008], , FFDC, CRITICAL, , Unit in faulted, incompatible with chassis option . Probable Cause Indicates that a blade inserted in the specified slot is not compatible with the switch chassisConfig option. The blade is faulted. Recommended Replace the blade. Make sure the replacement blade is compatible with your control processor (CP) Action type and chassisConfig setting. Severity CRITICAL EM-1009 Message , [EM-1009], , FFDC, CRITICAL, , powered down unexpectedly. Fabric OS Message Reference 79 53-1000600-02